TB Screen Removal Update

[Dominic]

http://www.zzperformance.com/zzp/fre...en_Removal.htm

:D (see an old post of mine where I noted +5rwhp on the dynojet by removing mine...)

[HAZ-Matt]

Thanks for the update...

[toast]

Hey Dom i have 2 things for ya. #1 I had to put my Tb screen back in on my 02 camaro because the engine would surge when i would let of the gas between 1500 and 2000 rpms, it was really annoying. Plus the idle was not smooth anymore. #2 I saw in your sig that you are supposely the fastest 2002 V6 F-body. As i looked farther i see you only ran a 15.6 something while i ran a 15.1. :D ;) Looks like i am the fastest. [img]tongue.gif[/img]

[ January 21, 2003: Message edited by: toast ]</p>

[Dominic]

<blockquote>quote:</font><hr>Originally posted by toast:
Hey Dom i have 2 things for ya. #1 I had to put my Tb screen back in on my 02 camaro because the engine would surge when i would let of the gas between 1500 and 2000 rpms, it was really annoying. Plus the idle was not smooth anymore. #2 I saw in your sig that you are supposely the fastest 2002 V6 F-body. As i looked farther i see you only ran a 15.6 something while i ran a 15.1. :D ;) Looks like i am the fastest. [img]tongue.gif[/img]
<hr></blockquote>

I was looking on the timeslips page, but thanks for notifying me [img]smile.gif[/img] I'll fix my sig now... However, I ran my time stock - you have an exhaust mod!

Sorry about the surging, wonder why? Mine doesnt do it!

[ January 21, 2003: Message edited by: Dominic ]</p>

[toast]

Yea i did not put my car on the timeslip page yet because i think i can get into the 14s with her. We will found out at AIS. :D ;)

[Fin]

My car runs fine without the MAF screen.

[MEAN 98]

i believe of all the mods i did this did the most for my car , with the whisper lid second in performance gains/// i want to get a high flow cat next

[Arctc Wolf]

I liked the gain. i did it after the whisper lid, and I could feel a little more pull after I did it. I'm sure it helps ur low end when u do exhaust mods. I wonder if smoothing out the area where the maf screen goes will get u any gains at high rpms. cuz that little ledge there seems like it could affect airflow a little bit, especially at higher speeds. I'm not talking about porting the whole thing, just smoothing that part around the inlet of the maf.