Ebay CAI...install review

[My_Teal_V6]

well the BBT delivered my CAI Monday and I installed it that night at work. The tube that ran from the TB elbow to the elbow on the filter tube sat to high because of the radiator guard and ABS control. This caused the hood to be raised about a 1/4" inch and bow.
Used a bench vise to squeeze it a little and now it sits between the two with no problems.
Has anybody else had this happen? If not here is a heads up for the 94.
I will need to drill a hole and install a conection for the vaccume hose to attach to the top tube. This should not be a problem.

[StormShadow]

which kit did you get. do you have a link. Im' curious what it looks like

[My_Teal_V6]

Here is a link to the one I bought. The only problems I found are: there is no attachment for the vaccume hose. And you have to squeeze the tube a little to make it fit between the ABS system and radiator. Other than that its fine.
http://cgi.ebay.com/ebaymotors/K-N-9...QQrdZ117QQrdZ1

[ August 08, 2005, 03:21 PM: Message edited by: My_Teal_V6 ]

[9camaro9]

"93 94 95 96 97 Chevy Camaro Z28 with 5.7L LT1 V8 engine!"

Thats what it says on ebay. It says nothing about the v6 so im guessing its not supposed to fit the v6??

[My_Teal_V6]

Sorry wrong one. I attached the correct link.