2000+ Manifold pictures?

[Dan M]

I'd like to see pictures of the 2000+ manifolds and heat shields if anybody has them. I'm trying to get a better idea of whether or not these will help my plug/wire problems. Pictures of pre-2000 manifolds would help, too. Thanks.

[viper98885]

Only ones that I have are pics from the GM Parts catalogs...if that would help lemme know.

[Dan M]

It sure would... do you happen to have them scanned?

[Cale]

I can get some pics of my '02 manifolds by Thur.

[scottblack]

I don't have any pics, but they WILL help you changing plugs/wires. Go look at some JBA shorty headers, that's what they look like, minus one scavenger (if that's the correct term) and they aren't coated obviously. They have lots of potential to be ported, then jet hot coated. [img]smile.gif[/img]

Scott

[viper98885]

<blockquote>quote:</font><hr>Originally posted by DrSquirts:
It sure would... do you happen to have them scanned?<hr></blockquote>

The file is actually in PDF format...I will take the pages out and post a link.

[Dan M]

Scott - I may do that. You say the manifolds have porting/coating potential?? If so I'll look into that, too!

Viper - That'd be great, thanks!

[Fin]

Here's one a friend took of my car awhile back. It's taken from the passenger-side of the engine compartment, looking down.

Exhaust Manifold

[viper98885]

Hope this helps...if you need part numbers, lemme know..

GM Parts Catalog - 2000-2002 Exhaust Manifold pics

[TheBeast]

I have pictures on my website

http://www.geocities.com/brista311/tubularmanifolds.jpg

copy & paste the link since it is geocities

[Dan M]

Great pics, guys, thanks a bunch! I'll have to take a look at my manifolds to compare them. Thanks again.