TSP rumbler & B&B tips?

[Predator Bird]

i'm thinking about getting the tsp rumbler this summer and i want to put my b&b tips on there, but after looking at this pic http://www.texas-speed.com/catalog/r...lercatback.jpg i see that the passenger side is slanted, then goes straight at the end. how will i be able to put on exhaust tips that are longer than that straight part? can an exhaust shop cut that and fab up a straight part to install my tips? my tips are over 12'' long and the rumbler has about 4'' of straight pipe for the tip. i need suggestions before i hack off my old system and come to realize this won't fit right w/ my current b&b tips. (i'd rather keep the b&b quads than have it sound better if it won't fit)

[Bluebird]

What slant are you talking about?

[Predator Bird]

if you look at the passenger side it is slanted outward, then has a kink in it to make it go straight out the back. if i install my tips on it the way it is now the passenger side tip will be pointed outward b/c it is longer than that 4'' section of straight part.

[Bluebird]

The kink is actually a mandrel-bend. When it is on your car, everything will line up perfectly.

[Predator Bird]

check out this pic. http://images.cardomain.com/member_i...63_89_full.jpg the tip is longer than those oval tips so i will need to mount them farther back on the pipe. the horizontal line shows about where i will have to cut the pipe to get my tip to fit right, the vertical line shows that the pipe now is not going straight out the back. if i stick the tip on the way it is now it will come out sideways. if i mount the tip on diagnally so it comes out straight, it won't come out the right part of the rear bumper. see what i'm saying now?