Tweet
Ok running open y-pipe is mind numbing.... went through a taco bell drive through and ppl came outside to see what the hell was making all that noise...
-
00\' firebird v6 5spd<br />201rwhp ---- 230 rwtq<br />\"Everyday I grow stronger...and further from you.\"<br />WARNING: Do not take any of my comments seriously unless they are technical in nature and then only at your own risk -
Try doing it with headers......shakes the whole car. Woke up 2 neighbors when driving to the exhaust shop.<a href=\"http://www.onid.orst.edu/~waltejam/\" target=\"_blank\">98 Bright Red Camaro</a><br />Too many mods to list....check my website -
headers go in tomorrow =)00\' firebird v6 5spd<br />201rwhp ---- 230 rwtq<br />\"Everyday I grow stronger...and further from you.\"<br />WARNING: Do not take any of my comments seriously unless they are technical in nature and then only at your own riskComment
-
yes just headers sounds so badass. drove around for like a day with just headers. The neighbors will hate you mind did [img]graemlins/rofl.gif[/img]40th Ann GTp 4doorComment
-
<blockquote>quote:</font><hr>Originally posted by Go4broke:
yes just headers sounds so badass. drove around for like a day with just headers. The neighbors will hate you mind did [img]graemlins/rofl.gif[/img] <hr></blockquote>
Open ypipe with headers is louder than open headers!<a href=\"http://www.onid.orst.edu/~waltejam/\" target=\"_blank\">98 Bright Red Camaro</a><br />Too many mods to list....check my websiteComment
-
Yea well pray for me... putting on headers infront of my apartment by myself lol.00\' firebird v6 5spd<br />201rwhp ---- 230 rwtq<br />\"Everyday I grow stronger...and further from you.\"<br />WARNING: Do not take any of my comments seriously unless they are technical in nature and then only at your own riskComment
-
Not that bad actually....I did it on ramps by myself in a day and a half.<a href=\"http://www.onid.orst.edu/~waltejam/\" target=\"_blank\">98 Bright Red Camaro</a><br />Too many mods to list....check my websiteComment
-
I installed my pacesetters in my driveway in about 12 hours, I only had hand tools, ratcheting box wrenches would have helped a lot and probably cut that time in half. And I can attest to Speedy's statement that the open y-pipe is louder than open headers for whatever reason. My friend told me he could hear my car like 2 miles from his house when I was at WOT with the open y-pipe. Make sure you can get that exhaust welded up soon though because the open headers or open y-pipe are far too loud to be driving around with. I had to drive about 40 miles down I95 with an open y-pipe and actually feared permanent hearing damagae.3.42 gears w/ LSD,<br />Headers, Cat delete, Loudmouth,<br />SLP intake, K&N, Whisper Lid, <br />EGR deleteComment
-
hey reoddai, send me an IM if you need a hand...Comment
-
Lol got all the bolts in on the passenger side except the middle two.. they won't thread for some reason.00\' firebird v6 5spd<br />201rwhp ---- 230 rwtq<br />\"Everyday I grow stronger...and further from you.\"<br />WARNING: Do not take any of my comments seriously unless they are technical in nature and then only at your own riskComment
-
me and my friend managed to put my headers on in 8 hours96 Camaro M5. Dark metallic gree (?dont know the offical color name)<br />Home made Intake :: Headers, 3inch headers back to Flowmaster muffler :: spec stage 3 clutch Now installed, waiting for 3.42\'s and LSD next month<br /><a href=\"http://photobucket.com/albums/y192/RiceEatingCamaro/?action=view¤t=newcar.jpg\" target=\"_blank\">My Car</a> <br /><br />Totalled Car.<br /><a href=\"http://bellsouthpwp.net/s/k/sk8er305/\" target=\"_blank\">96 CamaroRS</a>Comment
-
<blockquote>quote:</font><hr>Originally posted by ReodDai:
Lol got all the bolts in on the passenger side except the middle two.. they won't thread for some reason.<hr></blockquote>
Bo, be sure that you haven't tightened the rest of them down yet. Once they are all started threading, then begin tightening. Loosen them if you have alerady torqwued on them, get those middle two in, and then go at it.<a href=\"http://www.fullthrottlev6.com\" target=\"_blank\">www.fullthrottlev6.com</a> THE SOURCE!Comment
-
I got um all in.. torqued from the middle out.. Right now Solo time I have 5hrs in them... 1.5hours with help. So its been 6.5 hrs and I have the headers completely in. Now just plugs wires and y-pipe to go.. so about 2-3 more hrs.00\' firebird v6 5spd<br />201rwhp ---- 230 rwtq<br />\"Everyday I grow stronger...and further from you.\"<br />WARNING: Do not take any of my comments seriously unless they are technical in nature and then only at your own riskComment
-
took me and my buddy about 12 hours last night.1997 Camaro RS<br /><br />3\" Flowmaster Exhaust,Pacesetter headers,Catco Cat,Cold Air Intake,Clear bumper lights altezzas,chrome rear bumper letters,chrome badges, headlight conversion kit(soon to come),2 12 MTX Thunder 8000, MTX 6500d amp, Fosgate 1 farad capComment
-
So my truck is finally getting some work done, after 17 years, Oil pressure sensor went out and it’s located under the lower intake manifold. Have to...15 hours ago -
Hey guys. For starters I’ve always been a big car guy, I love all types of cars and can appreciate all types of engineering. I’ve always been a Chevy...2 weeks ago -
Getting a message saying invalid interface, haven’t used it since last year probably November. First time in 23 years I had a problem. Going to get...2 weeks ago
-
-
need help finding a balancer and a replacement balancer bolt. im at a lost after confusing myself researching.3 weeks ago
Comment