Does anyone where who owns a full edelbrock exhaust dislike it?
Announcement
Collapse
No announcement yet.
Edelbrock Dislikes?
Collapse
X
-
Tags: None
-
i had the edelbrock catback before my spintech and the edelbrock is good. the reason why i changed mufflers is the edelbrock broke from rust on the outlets. in oklahoma we had a couple of bad winters in the years after the install and i guess the salt used on the roads corroded it. but it is nice sounding and inexpensive. the only complaint is the packing burns out after a couple of years and will get louder. at idle this makes it awesome, at wot it starts to buzz. granted the spintech will do this as all exhaust on our cars will, but the spintech actually gets a little quieter at wot. so you know you can get the edelbrock system and if it brakes just switch out mufflers to whatever and that way you can try out a new sound.96 wht. firebird 5sd. rk sport headers,3in.catco, spintech catback,CAI,FRA,3.42/lsd 180*t-stat, centerforce dual friction clutch, ls1 driveshaft, polyurethane trans. mount.<br />01 blk. z28 m6, borla exht, lid, k<br />+n, sfc., chrome 18in. y2k c5 wheels.
Comment
-
That's interesting to hear - thanks for your comments guys.2002 5-spd NBM Camaro
Details: www.1lev6.com
Comment
-
The only complaint I can make is no supplied tips :(
So, I was able to choose the ones I want and have them welded on.
Other than that everything is fineRace car - gone but not forgotten - 1997 firebird V6
nitrous et & mph: 12.168 & 110.95 mph, n/a 13.746 & 96.38 mph
2013 Dodge Challenger SRT8: 12.125, 116.45
2010 Ford Taurus SHO: no times yet
Comment
-
<blockquote>quote:</font><hr>Originally posted by nikon:
nope I love it...I had flows...and the edelbrock is a huge improvement...no rice at all<hr></blockquote>
When you say no rice - do you mean at idle revving or driving around and such?2002 5-spd NBM Camaro
Details: www.1lev6.com
Comment
-
I've only heard of one maybe two bad comments about the edelbrock on this forum, ricey at high rpm something like that. I've yet to hear a soundclip of it on a typical 3.8L. I've seen about an equal number of comments regarding the hooker system with not a single negative post about it. I know that when I had my z28 that was a serious consideration because of the sound quality and modest performance gains. I'd like to hear the two side-by-side on a 3.8L, via sound clips, before making a final decision.
:rolleyes:
Comment
-
soundclips dont usually do any exhaust justice, the sound will vary from different quality of microphones :(Longtubes, true duals, ram air, caspers tps tec, ls1 26lb injectors, supersix powerpack, heads milled .020, comp cam .507 220/224 114 ls, forged internals and chromeoly pushrods, bored .030 over, tb spacer, tranny built with stiffer springs and kevlar bands, bigger servo, transgo stage 3 shift kit, edge 3600 stall, 1 pc aluminum ds, 3.73 superior gears, lsd rear ,custom pcm tuning, walbro 255 in tank,
Comment
-
<blockquote>quote:</font><hr>Originally posted by Hardshifter:
I've only heard of one maybe two bad comments about the edelbrock on this forum, ricey at high rpm something like that. I've yet to hear a soundclip of it on a typical 3.8L. I've seen about an equal number of comments regarding the hooker system with not a single negative post about it. I know that when I had my z28 that was a serious consideration because of the sound quality and modest performance gains. I'd like to hear the two side-by-side on a 3.8L, via sound clips, before making a final decision.
:rolleyes: <hr></blockquote>
I do agree with you on this, although from what I can tell on LT1s the Hooker system is much more raw sounding while the edelbrock is a little more refined. I just don't want a smooth exhaust tone like what the dynomax gives - its too boomy for my tastes and gives me a headache... I liked my flowmaster, Im just looking for something of higher quality [img]smile.gif[/img]2002 5-spd NBM Camaro
Details: www.1lev6.com
Comment
-
<blockquote>quote:</font><hr>Originally posted by Dominic:
When you say no rice - do you mean at idle revving or driving around and such?<hr></blockquote>
with the flows both...at idle it would start ricing at about 2g's under power it would rice around 2500....but take into consideration this want the cat back...I spent 60$ on a 40 series and used my stock pipes....but I have also heard it on black97cams car....he bought the catback...still not as nice....much louder yes...but Id rather be quieter and have a nicer sound
"Money can't buy me happiness, but I'm happiest when I can buy what I want"
05' CTS-V
00' Camaro - SOLD :(
Comment
-
edelbrock is good...my friend has it. one of the best sounding cat-back sys on the market for our cars. if you are looking for a quiet cat-back, don't get it, but if you want something pretty loud that sounds good, it's a good choice.
from what i've heard in person...
flowmasters = [img]graemlins/thumbsdown.gif[/img]
dynomax = [img]graemlins/thumbsdown.gif[/img]
v8 take-offs = [img]graemlins/thumbsup.gif[/img]
edelbrock = [img]graemlins/thumbsup.gif[/img]
haven't heard any other stuff on v6's that i KNEW what it was, but have heard several with all of these types and this is how i would rate them. flows aren't that bad, but they are way overused and overrated.2000 NBM M6 Camaro Z28<br />323/335
Comment
Latest Topics
Collapse
-
Hey guys. For starters I’ve always been a big car guy, I love all types of cars and can appreciate all types of engineering. I’ve always been a Chevy...2 weeks ago
-
by ssms5411Getting a message saying invalid interface, haven’t used it since last year probably November. First time in 23 years I had a problem. Going to get...2 weeks ago
-
need help finding a balancer and a replacement balancer bolt. im at a lost after confusing myself researching.3 weeks ago
-
Hello every one, ozzy here ive been looking at this page for weeks now finally joined. So my question is why is it that every turbo build forum just ends...3 weeks ago
Comment