header advise - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

header advise

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • header advise

    what headers, when installed can be hooked up to the stock y pipe?
    since i'm doing the duals..... i might as well research headers for it too eh?
    00 Camaro with the Y87 Package!<br /><br />stock times 15.59 @86.3mph with a 2.25 60\'

  • #2
    None....and if your are doing duals....why do you need a y pipe.
    <a href=\"http://www.onid.orst.edu/~waltejam/\" target=\"_blank\">98 Bright Red Camaro</a><br />Too many mods to list....check my website

    Comment


    • #3
      the duals will be matched up to the stock manifold location. so if a header set would hook up to stock y pipe location... would it not be presumable that it would fit to the duals?
      00 Camaro with the Y87 Package!<br /><br />stock times 15.59 @86.3mph with a 2.25 60\'

      Comment


      • #4
        If your doing duals you won't have a use for a y-pipe it will have to be custom bent piping coming from each header.
        00\' firebird v6 5spd<br />201rwhp ---- 230 rwtq<br />\"Everyday I grow stronger...and further from you.\"<br />WARNING: Do not take any of my comments seriously unless they are technical in nature and then only at your own risk

        Comment


        • #5
          okay....i KNOW i wont have to have a y pipe.
          what i'm asking, since the duals will mate with the stock manifolds in the stock location, is if any brand of headers will mate correctly w/o any modification to the headers or the dual setup.

          HENCE the questio if they would mate witht the stock ypipe..
          00 Camaro with the Y87 Package!<br /><br />stock times 15.59 @86.3mph with a 2.25 60\'

          Comment


          • #6
            No...all 3 different ones require a different y pipe.
            <a href=\"http://www.onid.orst.edu/~waltejam/\" target=\"_blank\">98 Bright Red Camaro</a><br />Too many mods to list....check my website

            Comment


            • #7
              Odd question but if your going duals then planning on switching to headers later all it would take would be a slight adjustment to the piping that met the new headers.
              00\' firebird v6 5spd<br />201rwhp ---- 230 rwtq<br />\"Everyday I grow stronger...and further from you.\"<br />WARNING: Do not take any of my comments seriously unless they are technical in nature and then only at your own risk

              Comment


              • #8
                thanks for the replies guys!!

                anyone know of a place that can give me some info on designing headers? because i think i can have some long tubes made for dirt cheap....
                00 Camaro with the Y87 Package!<br /><br />stock times 15.59 @86.3mph with a 2.25 60\'

                Comment

                Latest Topics

                Collapse

                FORUM SPONSORS

                Collapse
                Working...
                X