will this 97 intake work on a 98?

[1DangerousV6]

if not..why?..same engine/TB..thanks!

http://proformancemotorsports.com/ca...Ram-95-97.html

[ellik]

same throttle body, but do you have the hole in the fender well for the filters to slide down into? I can try taking a pic this afternoon once I get home.

[Paul Ford]

I think the abs module gets in the way on the 98 car as the 93-97 abs box is smaller. So the pipe wouldn't be able to squeeze past the radiator even if you cut a hole for the filters.

[1DangerousV6]

ahhh..that could make all the difference..possibly..i'll have to look..if you could get that picture that would ROCK

[ellik]

the abs module is incredibly close, even on the 97. you have to take the radiator shroud off to get enough play to pull the radiator forward about 1/2" to 1" to let the intake pipe slide down into its proper location. If your ABS module is much bigger, then you would have to look into relocating it a bit. I'll snap a pic once I get home.

[1DangerousV6]

ok..i'll check out the ABS and radiator when i get home..thanks man!

[GTO from Hell]

Thanks for the link! That's the cheapest price I've seen for the SLP cold air intake.

[ellik]

heres the pics.... it was too dark to really see, so it was all relying on the flash and guesswork

http://home.comcast.net/~ellik/SLP1.JPG
http://home.comcast.net/~ellik/SLP2.JPG
http://home.comcast.net/~ellik/SLP3.JPG
http://home.comcast.net/~ellik/SLP4.JPG


[edit] please ignore all the dirt.....

[1DangerousV6]

no those are some great photos man..especially the 3rd one..it shows everything..i dont see much different..i'll have to print it out and take a look at my car with the photos this weekend..thanks a ton man i REALLY appreciate it!

and yes thats the cheapest i could find it..and chrome :D

[GTO from Hell]

Looks like a real tight squeeze. How long did it take you to install it?

[3.4 slow to go]

Originally posted by GTO from Hell:
Thanks for the link! That's the cheapest price I've seen for the SLP cold air intake.

I'm kinda partial about the parts they have for the 03 f-bodies [img]graemlins/stickpoke.gif[/img]

[V8 Killer]

Originally posted by 3.4 slow to go:
03 f-bodies

[img]graemlins/stickpoke.gif[/img]

[ellik]

Originally posted by GTO from Hell:
Looks like a real tight squeeze. How long did it take you to install it?

about 45 minutes, but that was with removing the stock crap and my puppy stealing tools and bringing me sticks to play tug-of-war with. Probably could have done it in 20 minutes, if that.

[Tom Rs]

hey dangerousv6 i dont think any are chrome take a look "These pieces are black powder-coated and have a high gloss finish and come complete with all hardware and filter."

[1DangerousV6]

20 minutes..not bad!

ohh i didnt read enough..i was juggling a few things at work..must have just been the way the pic came out..id have it powder coated red anyway [img]smile.gif[/img]