Tweet
I was looking at my stock intake today, while putting a breather on the valve covers, and i've been wanting to change it ever since i got the car. so i went to an exauhst store and after taking measurements i bought some tubing got it mandrel bent and powdercoated it black. My plan is to remove the vented cover beneath the headlight on the bottom of the car and making a scoop from steel. Now i need to decide on a filter. I know every one is going to say K&N but are ther any people who've tried others? Does this sound like a bad idea, should i just buy a 200.00 dollar intake,(which i think is a rip!)
-
\'94 Pontiac Firebird 3.4<p>MODS<br />Custom CAI, by pass cat,<p>soon to come<br />SLP CAI, sweet thunder exhaust, 1.25 lowering springs, 3 pt sub frame connectors, traction bar, port & polished heads & intake manifold, Headers, strut tower bar, ram air hood, SLP rims 18 in, tires? any suggestions? E-mail at firebird1206@aol.com -
no buy an intake of ebay>$50 with shipping on average works just the same IMO welcome to the board man [img]graemlins/thumbsup.gif[/img] -
I forgot to say that i love doing my own custom work. For my cat, which had an awfull sound, i emptied it with a pick and put it back in, it sound good. But you said no, my idea wasn't bad?\'94 Pontiac Firebird 3.4<p>MODS<br />Custom CAI, by pass cat,<p>soon to come<br />SLP CAI, sweet thunder exhaust, 1.25 lowering springs, 3 pt sub frame connectors, traction bar, port & polished heads & intake manifold, Headers, strut tower bar, ram air hood, SLP rims 18 in, tires? any suggestions? E-mail at firebird1206@aol.comComment
-
I didn't say anything against you doing your own stuff man I just stated that you can get a cheaper kit off ebay that's all
Comment
-
no, don't get the idea that i got mad, i just prefer to work and think on my own. Does this e-bay item have a pic and can you give me a link?
thanks\'94 Pontiac Firebird 3.4<p>MODS<br />Custom CAI, by pass cat,<p>soon to come<br />SLP CAI, sweet thunder exhaust, 1.25 lowering springs, 3 pt sub frame connectors, traction bar, port & polished heads & intake manifold, Headers, strut tower bar, ram air hood, SLP rims 18 in, tires? any suggestions? E-mail at firebird1206@aol.comComment
-
So my truck is finally getting some work done, after 17 years, Oil pressure sensor went out and it’s located under the lower intake manifold. Have to...2 weeks ago
Comment