S-Pipe blues....

[nofear_102]

I have now checked out three different places in my attempts to find a 3" s-pipe. Each place quoted me at $400 to do it. Thats the biggest rip off ever!!. Can you buy a 3" s-pipe anywhere? I'm so fed up with this, its the only part holding me back from my 3' cat back system.

[AMinor65]

You can get two 90 degree mandrel bends from JC Whitney for less than 30 bucks. Some members get 45 degree bends. You can also do like I did and get a 3inch ipipe for 93-95 z28 from summit racing. Cost under 100 bucks. Part numbers 42273 and 45593. You need both parts. I didn't need an s-pipe. Muffler shop made it work by adding two 3-5 inch pipes to my total setup. Hope this helps.

[ April 22, 2002: Message edited by: AMinor65 ]</p>

[shortdog273]

<blockquote>quote:</font><hr>Originally posted by nofear_102:
I have now checked out three different places in my attempts to find a 3" s-pipe. Each place quoted me at $400 to do it. Thats the biggest rip off ever!!. Can you buy a 3" s-pipe anywhere? I'm so fed up with this, its the only part holding me back from my 3' cat back system.<hr></blockquote>Click Here. You can order two 45 degree pipes for your S pipe. I had the 90 degree pipes at first, but thanx to slacker, I found outthe 45 degree pipes will work and flow better.

[nofear_102]

Just to double check, you ordered 2 of these?
"45 Degree Mandrel-Bent Aluminized Tubing, (A/B)=7", (C)=3", ID=1-3/8", OD=1-1/2" "

Thanks, I'd say thats a bit cheaper than 400 bucks!

[shortdog273]

<blockquote>quote:</font><hr>Originally posted by nofear_102:
Just to double check, you ordered 2 of these?
"45 Degree Mandrel-Bent Aluminized Tubing, (A/B)=7", (C)=3", ID=1-3/8", OD=1-1/2" "

!<hr></blockquote>

That's correct. You need 2 of em to make the S pipe, but not that part# you have quoted. Click my S Pipe link in my sig for the correct one.

[Dominic]

http://www.slponline.com/view_produc...&SHOWEMAIL=Off

That is a far better solution. [img]graemlins/burnout.gif[/img]

[Dark Knight]

hey dominic what size pipe is that ? it doesn't say in the discription.

[nofear_102]

Dominic, what size is it? I'm looking for 3". As well why is it better? its $30 more for roughly the same thing.

Thanks for the links all!

[shortdog273]

<blockquote>quote:</font><hr>Originally posted by Dominic:
http://www.slponline.com/view_product.asp?PARTNUMBER=30045&SHOWIMAGE=On&SHO WEMAIL=Off

That is a far better solution. [img]graemlins/burnout.gif[/img] <hr></blockquote>

That pipe is made for something else.
[img]graemlins/bs.gif[/img]

[nofear_102]

ttt, Want Dominics Rebuttle

[scottblack]

Or you can order the one from Thunder Racing, on the LT1 exhaust accessories. 3 inch, 70 bucks. Also the SLP will work just fine, that's not BS!

Scott

[Seppo Kaitainen]

Easy now... Don't make me bring out Toto

Down boy!!! [img]graemlins/toto.gif[/img]

[Dominic]

The SLP pipe is a 3" S-Pipe and links up perfectly with any *normal* 3" I pipe and 3" cat.

Hell, Im getting it.

[RedFlare45]

Thanks for the 411 guys. I think I'm going with the SLP S Pipe also. [img]graemlins/burnout.gif[/img]

[shortdog273]

If the SLP pipe does work, my bad, but you're still paying an extra 30 bucks just for the convenience of it already being welded together.

[ April 23, 2002: Message edited by: shortdog273 ]</p>