already beat this horse to death, but help

[1999Spectre]

ok. i KNOW this thread has been beaten, has died, risen and done all over again. but. i HAVE searched and i cant find what i'm looking for. so i'm just looking for a yes or no answer. and if yes how hard? i want the air lid that slp has, but it says ls1 only. will this fit my v6? im pretty sure its been done before but what is needed to install? beating the smiley instead of the horse:spank: lol

[UDLOSE98]

Re: already beat this horse to death, but help

people said they have made it fit before, yes i dont knwo how hard...

but why not just get a v6 lid?

[1999Spectre]

Re: already beat this horse to death, but help

the one with the 3800 II on it looks cheap as hell.

[FireBird_Fr3ak]

Re: already beat this horse to death, but help

Because out intakes are towards the drivers side you have to get flexable tubing which IMO makes the HP gain of a lid pointless. Just get the normal black ones and put a decal on it.

[1999Spectre]

Re: already beat this horse to death, but help

well i took my big A$$ hp reducer off(between the air box and t.b.)lol shaved the ridges inside the airbox, rmoved the screen inside the t.b. cut the little thing in the oval hole out, plus the ram air mod with a k&n. took the sticker off the airbox, repainted it black and put a k&n decal on it. hold on and i'll go take a pic real quick.

[BLLDOGG]

Re: already beat this horse to death, but help

Yes, it will fit in place. No, it wil not be a direct bolt on. The only difficulty is getting some type of hose to hook up the lid and throttle body.

[1999Spectre]

Re: already beat this horse to death, but help

ok thats what i needed. the piping wont be a problem.

[FireBird_Fr3ak]

Re: already beat this horse to death, but help

The whole point in getting a lid is for the air to have a straight shot to the tb but adding the bend just loses some the hp you would gain from a lid...

[1999Spectre]

Re: already beat this horse to death, but help

[1999Spectre]

Re: already beat this horse to death, but help

does this come with the piping?
http://rksport.com/main/part_detail....mdid=1&catid=3

[BLLDOGG]

Re: already beat this horse to death, but help

no, i dont think you need piping when you get the correct one. It's been years since i did mine but mine has the long neck like that, that goes into a short rubber connector then into the throttle body

[Smoke Panther]

Re: already beat this horse to death, but help

does this come with the piping?
http://rksport.com/main/part_detail....mdid=1&catid=3

that is what you should be buying, rather than the LS1 stuff. All you have to do is remove your stock stuff, and leave that last rubber piece on the throttle body

[NCState98]

Re: already beat this horse to death, but help

"99-02 Intake System- Lid Only"

Like the other guys were saying, no piping. And much more efficient than using the LS1 lid.