Approx. CFM of P&P 3.4 iron heads

[SpeedingFirebird]

A friend of mine is going to do a desktop dyno of my car. I've spend hours of seaching, but I am coming up blank on the CFM for P&P heads with port matched intake for the 3.4. Can anyone ballpark me a number for redline (5200)?

Thanks!
Jason

[FunkZ]

Re: Approx. CFM of P&P 3.4 iron heads

Here's SSM's old data sheet on their 3.4 package. I don't think they advertise this anymore so I hosted it on my site, but you might want to save it for future reference, I might take it down.

http://www.funkz.net/downloads/ssmdatasheet.pdf

[SpeedingFirebird]

Re: Approx. CFM of P&P 3.4 iron heads

Here's SSM's old data sheet on their 3.4 package. I don't think they advertise this anymore so I hosted it on my site, but you might want to save it for future reference, I might take it down.

http://www.funkz.net/downloads/93-95...kdatasheet.pdf

That link didn't work. I looked around but didn't find it on your site.

I knew you'd respond. I was going to IM ya, but I didn't want to be a PIA. :)

[FunkZ]

Re: Approx. CFM of P&P 3.4 iron heads

Sorry, damn punctuation and capitilization. I renamed the file to make things easier and edited the link above.

Real quick though stock heads were around 130cfm at .500 lift and their ported heads were 150cfm.

[SpeedingFirebird]

Re: Approx. CFM of P&P 3.4 iron heads

Sorry, damn punctuation and capitilization. I renamed the file to make things easier and edited the link above.

Real quick though stock heads were around 130cfm at .500 lift and their ported heads were 150cfm.

I tried to replace the periods with ascii, but it still wouldn't work.

My estimate was around 157, so I wasn't too far off. Very cool - thanks! :cool: