is it possible to take the whole exhaust off without cutting anything? - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

is it possible to take the whole exhaust off without cutting anything?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • is it possible to take the whole exhaust off without cutting anything?

    on a 97 camaro or 98 firebird..
    if i unbolt the headers and jack the rear up high enough.. would it be able to be pulled through?

    and are those 2 cars interchangable? could i take the exhaust off the camaro and put it on the firebird?

  • #2
    Re: is it possible to take the whole exhaust off without cutting anything?

    Originally posted by JumpInTheFire.com
    on a 97 camaro or 98 firebird..
    if i unbolt the headers and jack the rear up high enough.. would it be able to be pulled through?
    No. You'd have to drop the rear axle if you wanted to do that

    and are those 2 cars interchangable? could i take the exhaust off the camaro and put it on the firebird?
    yes

    Comment


    • #3
      Re: is it possible to take the whole exhaust off without cutting anything?

      yeah you have to cut the over axel pipe, but i believe that is it

      Abbott long tubes,homemade true duals,slp ram air,whisper lid,eibach springs,kyb shocks,BMR subframe connectors, BMR LCA reloc brackets,BMR LCAs. T-top/manual converted

      Comment


      • #4
        Re: is it possible to take the whole exhaust off without cutting anything?

        You don't have to cut the pipe over the axle. You need to unbolt your pass side rear shock, and pull the spring, then pull the rear down far enough. I removed the stock catback from my 00 Formula in one piece this way!
        <a href=\"http://www.fullthrottlev6.com\" target=\"_blank\">www.fullthrottlev6.com</a><br /><a href=\"http://www.chitownracing.com\" target=\"_blank\">www.chitownracing.com</a>

        Comment


        • #5
          Re: is it possible to take the whole exhaust off without cutting anything?

          would be 10Xs easier to just cut it lol. But i guess if you have to get it off in one piece

          Abbott long tubes,homemade true duals,slp ram air,whisper lid,eibach springs,kyb shocks,BMR subframe connectors, BMR LCA reloc brackets,BMR LCAs. T-top/manual converted

          Comment


          • #6
            Re: is it possible to take the whole exhaust off without cutting anything?

            Why would you even want to save a stock exhaust?

            Comment


            • #7
              Re: is it possible to take the whole exhaust off without cutting anything?

              Very true. I just wanted to keep my stuff in one piece since my car was an NHRA edition and 1 of like 200 made. For a stock V6 exhaust, i'd cut it and band clamp it!
              <a href=\"http://www.fullthrottlev6.com\" target=\"_blank\">www.fullthrottlev6.com</a><br /><a href=\"http://www.chitownracing.com\" target=\"_blank\">www.chitownracing.com</a>

              Comment

              Latest Topics

              Collapse

              FORUM SPONSORS

              Collapse
              Working...
              X