cheap intake

[t-topV6]

i wouldn't mind a little bit more power... but there are two problems...
1) don't know how to install much (first car) although i would try
2)don't have much money
ok so... without doing major changes... my thoughts performance wise, was mabey an old v8 exhaust system or a flow master muffler... and intake... now, i would like a cheap intake system... i was browsing ebay, after searching, i found people say to look up chrome intakes... and i came up with these...
http://cgi.ebay.com/ebaymotors/95-97...QQcmdZViewItem
looks ok
http://cgi.ebay.com/ebaymotors/1995-...QQcmdZViewItem
looks to short... like a hot air sucker
http://cgi.ebay.com/ebaymotors/95-96...QQcmdZViewItem
looks ok... what do you think i should do... any problems or opinions?

[TheGr8Schlotzky]

Re: cheap intake

Last one looks about right.

You can build yourself for cheaper. I used heater ducting. 4" to 3" adapter, 3" 90* bend, 18" (i think) 3" tubing, 3" 90* bend, K&N filter on the end. Gets it right down into the fender well, and cost about 15 bucks plus the filter. Painted it black and it doesn't look so horrible.

[t-topV6]

Re: cheap intake

Last one looks about right.

You can build yourself for cheaper. I used heater ducting. 4" to 3" adapter, 3" 90* bend, 18" (i think) 3" tubing, 3" 90* bend, K&N filter on the end. Gets it right down into the fender well, and cost about 15 bucks plus the filter. Painted it black and it doesn't look so horrible.

hmm... thats sound like the best way to go so far... lol thanks man :D:tup:

[3.8Fury]

Re: cheap intake

I have it..lol it works good!

[Nirgal]

Re: cheap intake

:tup: Hey ! That's nicely made !
Can you tell if there is any improvement ?
Like throttle response, noise or fuel economy ?

[96silverbullet]

Re: cheap intake

Yeah I custom made mine from polished tubing from Auto Zone than put a K&N filter on it.