Tweet
I just bought CAI headers and abbott racing header gaskets, but abbot doesnt make flange gaskets that would go between the header and the Y-pipe...so where can I get gaskets for there? What have you guys that have headers from CAI done?
-
1999 Firebird Y87/W68 -
Re: Header gaskets
you could use copper RTV and make a gasket -
Re: Header gaskets
don't use copper rtv. the collector is a 3-bolt and 2.5" right?
http://store.summitracing.com/egnsea...115+4294787535
Comment
-
Re: Header gaskets
yeah, its 3-bolt 2.5" why?
thanks for your help guys. i just went out and bought some copper rtv...but now taht you say this voodoo...i want to hear more. do you have CAI headers and use gaskets from this site? which would you recommend? the copper gaskets?Last edited by 99BlackW68; 12-27-2007, 12:07 AM.
1999 Firebird Y87/W68Comment
-
Re: Header gaskets
any of those gaskets be it copper, aluminum, or steel core laminate will be better than the rtv. They're easier, reusable, and you don't have to squeeze orange goop all over it. I believe the copper rtv is only rated to 700 degrees intermittently which is really pushing it.Comment
-
Re: Header gaskets
do you think local shops like napa or autozone would sell gaskets like this? my dad said local speed shops or napa would probably have stuff like that. what do you think?
1999 Firebird Y87/W68Comment
-
Re: Header gaskets
I believe Advance Auto Parts has the gaskets you're looking for.~97 3.8L V6 Camaro~
A few things
Only Member of Team Hooker?!?Comment
-
Re: Header gaskets
awesome. yeah im gonna drive around tomaro to different shops and see if anyone has them. If they do, im installing them this saturday. thank you for your help guys
1999 Firebird Y87/W68Comment
-
Re: Header gaskets
Where can i order Abbott header gaskets?
Anyways for flange, dont waste your time with all that crap, especially the RTV silicone, i used that stuff and lasted 2 weeks at max or one hard run. Go to Chevy or Pontiac dealearship, tell them you want an EGR gasket for the LT-1, its like $4 if that. It will look goofy because the LT-1 has 2 bolts, which i dont know who designed the EGR for our engine but they should be shot for having one bolt at the bottom, which causes the top to leak but anyways heres a pic of mine and what it should look like:
Last edited by 99W68Firebird; 01-05-2008, 09:21 PM.99\' W68 Firebird<br />SLP Ram air kit,Whisper Air Lid, k&n, 8mm Taylor Wires, Bridgestone Potenzas RE950, BMR Red LCAs, Pacesetter Headers and 3\"in catalytic converter with 2.75\" Flowmaster Cat-back<br /><br /> <a href=\"http://www.cardomain.com/memberpage/501008\" target=\"_blank\">http://www.cardomain.com/memberpage/501008</a>Comment
-
Re: Header gaskets
-you can get abbott gaskets from http://www.abbottracingheads.com/
-nobody ever said anything about the EGR, that looks ridiculous.Comment
-
Re: Header gaskets
yeah, i just went to autozone and they had exactly what i was looking for. the headers are installed already though and all is good. i didnt put a gasket on the EGR because the stock setup didnt have one, so i didnt think it would matter. thanks for all your guys' help
1999 Firebird Y87/W68Comment
-
Re: Header gaskets
ha yea your right, I wasnt paying attention.
Rediculous looking or not, as long as it doesnt tick like a ***** I can care less. I guess I could always slice off the top but never really cared.
99\' W68 Firebird<br />SLP Ram air kit,Whisper Air Lid, k&n, 8mm Taylor Wires, Bridgestone Potenzas RE950, BMR Red LCAs, Pacesetter Headers and 3\"in catalytic converter with 2.75\" Flowmaster Cat-back<br /><br /> <a href=\"http://www.cardomain.com/memberpage/501008\" target=\"_blank\">http://www.cardomain.com/memberpage/501008</a>Comment
Comment