Tweet
im going to build my own intake for my 95 3.4 sometime soon and i was thinking about makeing it much shorter, by putting the cone filter right whare the bend is now, and putting holes in the filter for the sensors and stuff. is it too hot right there? should i just build a regular one out of PVC that puts the filter whare it goes? what size PVC should i use?
-
-
Re: building my own intake.
4 in metal pipe is the setup i have it sounds better then my old pvc pipe
and i think its also thinner. -
Re: building my own intake.
putting it that close will only draw in hot air. check out how I set mine up
1996 Silver Camaro RS, A4, K&N CAI, Flowtech exhaust, !MAF screen.
http://www.fquick.com/96silverbulletComment
-
Re: building my own intake.
Is there any resion I should use metal insted of pvc other than looks?Comment
-
Re: building my own intake.
sound?Comment
-
Re: building my own intake.
Good point. I'm gonna see what I can find at home depot tomarow. What angel should the 2nd bend me?Comment
-
Welcome future UK stars... Darius Miller, Deandre Liggins, Kevin Galloway, Josh Harrellson
Comment
-
Re: building my own intake.
just my .02, I think if you can wrap the tube with some heat wrap, it'll reduce the temp drastically
:)Comment
-
Re: building my own intake.
I was thinking about that, it would look ugly but it would work.Comment
-
Re: building my own intake.
Performance > look! Ever thought how they sell so many STIs ..
:)Comment
-
Re: building my own intake.
The first bend is 90 and the second is 45Originally posted by niik000 View Post1996 Silver Camaro RS, A4, K&N CAI, Flowtech exhaust, !MAF screen.
http://www.fquick.com/96silverbulletComment
-
Re: building my own intake.
I think ill heat wrap it and then put bigger pipe around the heat rap. And ill paint it all purdy.Comment
-
Re: building my own intake.
Sounds like a great project to me!!!Originally posted by niik000 View Post
:)Comment
-
Re: building my own intake.
I made mine out of a 4" elbow, 4" to 3" reducer, and a 3" elbow.
All out of heater ducting from Lowe's.
Can't really see it in this picture, but kind of. The filter is in the lower fender well and I have a scoop underneath to draw cold air in.
Comment
-
Re: building my own intake.
Do those ridges and the extra bend cause too much less flow? I was thinking about useing exaust pipe. And putting something like that over it to hide the heat wrap.Comment
Comment