Question for magnaflow owners...

[Bonemaro]

Re: Question for magnaflow owners...

I have a vid of mine from the inside around here somewhere.

[onspeed]

Re: Question for magnaflow owners...

Are you the guy with the camera mount in his car?

[Bonemaro]

Re: Question for magnaflow owners...

Are you the guy with the camera mount in his car?

Not permanently, but the video in question was shot from a mounted camera. You talking about the video at the red light entering the highway, shot high dead center of the car?

[onspeed]

Re: Question for magnaflow owners...

Yeah. I think you posted it in another thread... was the sound pretty accurate to how it sounds in person?

[Bonemaro]

Re: Question for magnaflow owners...

Yeah, I would say so... more or less. You'll never match it exact and everybody's ears are different. It was recorded digitally using manual levels and a Sennheiser MKH-416 shotgun mic, which is a pretty high end microphone. Granted, it's compressed MP3 audio for internet streaming, but the tone is close.

[Timwiltshire]

Re: Question for magnaflow owners...

Not very loud at all. My Magnaflow only sounds beefy when I'm getting on it. Once I get to cruising speed, I can hardly hear it.

Do you have headers? Mine sounds freaking LOUD while I'm driving, and kinda ricey from the inside of the car. Then again I don't really have any other mods on the car other than the complete exhaust system.

[onspeed]

Re: Question for magnaflow owners...

Link to the video
http://forum.camarov6.com/showpost.p...65&postcount=9

[Bonemaro]

Re: Question for magnaflow owners...

Do you have headers? Mine sounds freaking LOUD while I'm driving, and kinda ricey from the inside of the car. Then again I don't really have any other mods on the car other than the complete exhaust system.

Nah, just the factory.

[Bonemaro]

Re: Question for magnaflow owners...

Link to the video
http://forum.camarov6.com/showpost.p...65&postcount=9

Yup...

[onspeed]

Re: Question for magnaflow owners...

Update: Ordered the magnaflow, installed it this morning. Simple install, didn't run into any problems except that the tips are touching my rear bumper. Not actually the bumper, but the ground effect from the RS appearance package. I'm deciding between putting a spacer on bolts of the hanger mounts or just bending the hangers themselves.... comments?

[95astrovan]

Re: Question for magnaflow owners...

dont bend em, just rig up a spacer, maybe 1 or 2 links of chain?

i'm thinking about pickin' up this catback later on, because A) my Flowmaster is starting to rust out ALREADY! and B) it flows alot better than the Flowmaster...ironic...