Will this fit my 96 Maro?

[jabberman]

http://i292.photobucket.com/albums/m...e/P1000377.jpg


Some guy is Selling it and said Its for LT1 cars.

[David8399]

Re: Will this fit my 96 Maro?

you would need the intake elbow of an lt1 car as well

[Tom Rs]

Re: Will this fit my 96 Maro?

yes but you will need an elbow if he doesnt include it

[IwannaCamarosoBad]

Re: Will this fit my 96 Maro?

So a V8's intake will fit a V6 as long as you have the elbow?

[ssms5411]

Re: Will this fit my 96 Maro?

In the pic he is missing the elbow and the 2 filters. That would make it a full kit if you had them. You can also buy intake elbows for around $30-40 shipped. You would want a 90 degree elbow with 4" on one end for the TB and whatever the SLP one is(I think is 3"). If he is selling the whole kit with eveything for less than a $100 that would be a good deal and buy it. If it is more just make your own, it is cheaper and probably flows better.

[Tom Rs]

Re: Will this fit my 96 Maro?

So a V8's intake will fit a V6 as long as you have the elbow?

more or less, as long as its for a 93-97 i believe it can work

[IwannaCamarosoBad]

Re: Will this fit my 96 Maro?

more or less, as long as its for a 93-97 i believe it can work

Thats awesome.

[jabberman]

Re: Will this fit my 96 Maro?

He's selling the 2 things in the pic for 75 shipped.

Do you think it's worth it.

[David8399]

Re: Will this fit my 96 Maro?

you can buy the intake elbow from a gm dealer. it is called the 1le elbow. although 1le isnt listed in the rpos to get it, it is something to do with the heater is the rpo code you want.

[IwannaCamarosoBad]

Re: Will this fit my 96 Maro?

I do believe 97rs4Life recommended this site for a elbow to Niko

Link:
http://www.intakehoses.com/

[ssms5411]

Re: Will this fit my 96 Maro?

He's selling the 2 things in the pic for 75 shipped.

Do you think it's worth it.

No, it is not. Just make your own. Get a 90 degree 4" to 3.5" elbow, get 3 feet of flex hose 3.5" tubing, then get a K&N filter and you'll be set might need a coupler for the hose to K&N (home depot is good). Just run the hose into the fender well on the drivers side and put the K&N on. I used a rubber tie down to hold the filter in place( no need to loose a $45 filter for a bump in the road). All the parts might come to around $120 but you'll have a nice flowing intake with a good filter.

[jabberman]

Re: Will this fit my 96 Maro?

No, it is not. Just make your own. Get a 90 degree 4" to 3.5" elbow, get 3 feet of flex hose 3.5" tubing, then get a K&N filter and you'll be set might need a coupler for the hose to K&N (home depot is good). Just run the hose into the fender well on the drivers side and put the K&N on. I used a rubber tie down to hold the filter in place( no need to loose a $45 filter for a bump in the road). All the parts might come to around $120 but you'll have a nice flowing intake with a good filter.

Thats Pretty Interesting!!

Thanks for the Suggestion... i'll Think about that one.

[blindeyed]

Re: Will this fit my 96 Maro?

He's selling the 2 things in the pic for 75 shipped.

Do you think it's worth it.

That would actually be a good deal. You can then buy the 2 filters here:
http://www.slponline.com/view_product.asp?P=21035B

That would put you right around $120-$130, compared to the retail price of nearly $300. I'd buy it if I were you.

[RadRacer]

Re: Will this fit my 96 Maro?

I do believe 97rs4Life recommended this site for a elbow to Niko

Link:
http://www.intakehoses.com/

That's where I bought my elbow. I'm using a LT1 Moroso CAI; hooked it up with a 4" to 3" 90* reducing elbow and a 3" coupler. Alot cheaper then buying a 1LE elbow, IIRC.

No, it is not. Just make your own. Get a 90 degree 4" to 3.5" elbow, get 3 feet of flex hose 3.5" tubing, then get a K&N filter and you'll be set might need a coupler for the hose to K&N (home depot is good). Just run the hose into the fender well on the drivers side and put the K&N on. I used a rubber tie down to hold the filter in place( no need to loose a $45 filter for a bump in the road). All the parts might come to around $120 but you'll have a nice flowing intake with a good filter.

That would work, but I wouldn't recommend using flex-tubing as the ridges will disrupt flow; take some measurements and use PVC instead. Paint it black and it'll look better then the flex-tubing too.

[LETZRIDE]

Re: Will this fit my 96 Maro?

http://cgi.ebay.com/ebaymotors/New-L...Q5fAccessories

would that elbow work? looks like it has a wide mouth and I am not sure if that would fit on our throttle bodies?