if you put a stock ls1 exhaust on a 3.8?
Announcement
Collapse
No announcement yet.
how good would this sound?
Collapse
X
-
Re: how good would this sound?
Probably something similar to this.
Originally posted by greasemonkey View PostStock tubular manifolds, stock Y and S pipe, Z28 take off exhaust
http://s98.photobucket.com/albums/l2...=ryanmovie.flv
The free rev isn't as poppy as it sounds, its the camera. Either way I don't go around free revving anyways.'99 Camaro
'04 Saab 9-3 Aero
'90 Audi Coupe Quattro
-
Re: how good would this sound?
sounds like ****
i would be curious to hear how it sounds under load outside the car, need a drive by soundclip1994 3.4L DSG Camaro
Comp Cam 260h w/ 1.6 rockers, J&M STB, UMI 3pt SFC's, Spohn RCA's + Adj. PHR, KYB AGX Shocks, PS Headers, Cutout, Posi Rear w/3.42's, Aluminum DS, Wings West Body Kit, SS Hood/Spoiler, 17" TT2's 9.5/11" 275/315's, 5% tint
sigpic
Comment
-
Re: how good would this sound?
Sounds like a weed wacker, LOL Summit turbo FTW. Nice interior sound and a nice tone throughout the rpms with no rasp.08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine
Comment
-
Re: how good would this sound?
anyone get rid of the rasp yet?? i saw one green camaro with a borla dumped at the diff, but i dont wanna do that. mine is super raspy, ill try to get some clips up.Team NoVa
2000 Firebird- Intake, Pacesetters, !cat, full 2.5 to flowcrapster, 1.9 rockers, LS6 springs and Intense modded retainers, WS6 speedlines, T/A bumpers and hatch, 5 spd swapped, SOON TO BE nitrous'd and cammed.
Comment
-
Re: how good would this sound?
Hey, my current exhaust system is either a ls1 or lt1 pull off (just bought the car). It is quiet, especially inside while driving and rasps ever so slightly when the rpms build up. It's not bad and not great either. I posted earlier today about switching to a single exhaust all the way back with a Borla or Dynomax for a better/slightly louder tone. Hope this helps...
Comment
-
Re: how good would this sound?
http://www.youtube.com/watch?v=oMdRV9ZHH3M
i found it. this has bery little rasp, but also a cam. so...Team NoVa
2000 Firebird- Intake, Pacesetters, !cat, full 2.5 to flowcrapster, 1.9 rockers, LS6 springs and Intense modded retainers, WS6 speedlines, T/A bumpers and hatch, 5 spd swapped, SOON TO BE nitrous'd and cammed.
Comment
-
Re: how good would this sound?
i dont feel like listening to the clips but i used to have one off a v8 on mine. Its nothing too spectacular but it sounds alot better than stock. just about any aftermarket catback will sound better but it will definatly sound better than stock so if you found a good deal, do it
Comment
-
Re: how good would this sound?
I have a VS cam, RKsport headers, 3" exhaust , no cat, into a 3" cutout then into a 3" in/out Summit Turbo muffler with a 3" turn down. With the cutout closed shifting at 6000 rpms there is no rasp. I have a little rasp with the cutout open past 4000 rpms. But it is a very good muffler for sound.08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine
Comment
-
Re: how good would this sound?
i have pacestter headers, 3" cat and then a factory SLP dual exhaust off a SS. Its like the stock ls1s but flows a little better. My vid is in the exhuast clip section if you wanted to check it out
Comment
Latest Topics
Collapse
-
by ssms5411So my truck is finally getting some work done, after 17 years, Oil pressure sensor went out and it’s located under the lower intake manifold. Have to...5 hours ago
-
Hey guys. For starters I’ve always been a big car guy, I love all types of cars and can appreciate all types of engineering. I’ve always been a Chevy...2 weeks ago
-
by ssms5411Getting a message saying invalid interface, haven’t used it since last year probably November. First time in 23 years I had a problem. Going to get...2 weeks ago
-
need help finding a balancer and a replacement balancer bolt. im at a lost after confusing myself researching.3 weeks ago
Comment