True duals

[3800SoloWing]

Is it possible on 4th gens? If so, how and how much?

[gotchocmilk39]

Re: True duals

Search there are about 5 of us now with TD's my thread is around here some where I have made a change sense then with headers and dumps after the mufflers insted of tail pipes because of rasp issues on a 180* bend.

[phoenix_rising]

Re: True duals

Yes most definitely. Price is dependent upon which shop you use. I can get true duals using flowmasters for $150-250 depending on which shop I go to.

[3800SoloWing]

Re: True duals

I'd probably go and get another couple of Hooker Aerochambers with a different inlet/outlet config, since I really like the one I have installed right now. The question lies if the stock headers can be used, but cut to allow for the TD's to go on. No sensor modification needed? If not, I might just do it with a friend of mine for free.

[Smoke Panther]

Re: True duals

Is it possible on 4th gens? If so, how and how much?

http://forum.camarov6.com/showthread...ght=true+duals
http://forum.camarov6.com/showthread...ght=true+duals
http://forum.camarov6.com/showthread...ght=true+duals
http://forum.camarov6.com/showthread...ght=true+duals
http://forum.camarov6.com/showthread...ght=true+duals
http://forum.camarov6.com/showthread...ght=true+duals
http://forum.camarov6.com/showthread...ght=true+duals
http://forum.camarov6.com/showthread...ght=true+duals
http://forum.camarov6.com/showthread...ght=true+duals