Install

[Choppers]

Can i see come pics of ya'lls installs. THinking about getting the Brand X kit with single shot(wet). Wanted to see underhood pics and bottle mounted in spare tire area if possible.

[Bird_Of_Prey]

Re: Install

Wet is really a PITA in these cars. Your only nozzle placement options are in the TB which is too thin to actually get a bite, or to order a TB spacer and mount it there. Not to mention they are more prone to backfires. If you have a mostly stock car, go dry.

[97rs4life]

Re: Install

Wet is really a PITA in these cars. Your only nozzle placement options are in the TB which is too thin to actually get a bite, or to order a TB spacer and mount it there. Not to mention they are more prone to backfires. If you have a mostly stock car, go dry.

I ran a wet kit for a couple years. Not really a PITA at all. I just drilled a hole in the tb, inserted my nozzle and used the nut on the inside to hold the nozzle in place. Not hard and as long as the shot size is 100 or less backfires are not an issue

[Shodown]

Re: Install

I ran a wet kit for a couple years. Not really a PITA at all. I just drilled a hole in the tb, inserted my nozzle and used the nut on the inside to hold the nozzle in place. Not hard and as long as the shot size is 100 or less backfires are not an issue

Werd. I've had a wet kit on my car for 3 years and the nozzle in the TB was easy and hasnt had any problems.

These motors do work really well on dry kits too. For a simple, single shot kit either one will work fine.

[Choppers]

Re: Install

yea i am going wet because i plan on putting an ls1 in it in the future. I am only going to do a 75 shot.

[Fondle]

Re: Install

here is my bottle in the spare tire area



i had a dry kit so my engine bay wont look anything like what you will have

[Bird_Of_Prey]

Re: Install

yea i am going wet because i plan on putting an ls1 in it in the future. I am only going to do a 75 shot.

I'd stay dry with that. Just sayin, mafs, lids, filters, they add up.

[Choppers]

Re: Install

what do you mean maf's, lids, filters?

[Shodown]

Re: Install

what do you mean maf's, lids, filters?

If you install it incorrectly or dont have a window switch then have a backfire due to fuel puddling in the intake, the maf, lid, air filter and other parts of the engine will be destroyed and need replaced.

[Choppers]

Re: Install

i am going to do it right with a fuel coutoff, window switch, purges, nitrous filters....so i think i will be fine. been talking with dave at nitrous outlet. he knows his stuff. i have just been wanting to see some underhood shots and stuff to make it a clean install.

[Bird_Of_Prey]

Re: Install

If you install it incorrectly or dont have a window switch then have a backfire due to fuel puddling in the intake, the maf, lid, air filter and other parts of the engine will be destroyed and need replaced.

Or have low bottle pressure....

[Shodown]

Re: Install

Or have low bottle pressure....

Yeah, that too.

[Choppers]

Re: Install

all these chimes and no pics but 1. anybody?

[xcdarrel17]

Re: Install

This is a dry kit.
Bottle

Noids

Lid and Lines

WOT Switch

[xcdarrel17]

Re: Install

Arming Switch

Window Switch

FPSS and Fuel Press Gauge Teed off