Tweet
where did everybody else using a wet kit put the micro switch at or how did you mount it pics would help, thanks.
-
-
Re: Micro switch placement (Wet Kit)?
what year is your car? -
Re: Micro switch placement (Wet Kit)?
its a 95Comment
-
Re: Micro switch placement (Wet Kit)?
mount it on the tb then so that when the tb cable is at wot it clicks it.Comment
-
Re: Micro switch placement (Wet Kit)?
do u have a pic of yours?Comment
-
Re: Micro switch placement (Wet Kit)?
doubt it, I removed mine a couple years ago when I switch setups. There is a metal square rod on the side of the tb by the spring. I threaded it into that hole there and bent the switch bracket around into positionComment
-
Re: Micro switch placement (Wet Kit)?
ok thanks ill check it out.Comment
-
Re: Micro switch placement (Wet Kit)?
I do have an old pic from back in the day. Here it isAttached FilesComment
-
-
Re: Micro switch placement (Wet Kit)?
I mounted mine underneath the gas pedal. This way I could go to WOT without hitting the switch, but if I pushed on the pedal a bit harder, it clicked. I doubt I'll find any pics though, sold that car nearly 7 years ago.-<i>Travis</i><br /><b>99 Trans Am, Pewter, A4</b> Forged, stalled, and cammed<br /><b>85 Buick Regal WH1 T-Type</b> It\'d be cool if it ran...<br /><b>94 Camaro 3.4, Teal, M5</b> The daily beaterComment
-
I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...1 week ago -
Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...2 weeks ago -
Hi all new to the community here. I have a 2014 RS 6 speed manual... and so about a year ago my tail lights got cracked and eventually the plastic housing...4 weeks ago
Comment