nitrous help - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

nitrous help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • nitrous help

    Just bought a nitrous ki justwondering whay size of jets do i need?

  • #2
    Re: nitrous help

    Depends what nozzel your running.
    08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
    96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

    Comment


    • #3
      Re: nitrous help

      its a ny trex kit. and its a wet shot just installed it. but not sure what size of shot i should go with.

      Comment


      • #4
        Re: nitrous help

        I would start off low like .44 nitrous and I think fuel is like .26 jet. I know a .61 or .63 for nitrous is a 100 shot and fuel is like .30 to .34. Do you have a wideband? I wouldn't run it without one. What supporting mods do you have? You should be able to find a table where it tells you what shot is which.
        08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
        96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

        Comment


        • #5
          Re: nitrous help

          whats s wideband? lol and i have a lid shorty headers msd wires. ngk plugs hmm and glasspack exhaust .. ac delete and powersteering delete. and i bought it used the guy just installed it for me

          Comment


          • #6
            Wideband air fuel gauge. Tells you your air/fuel mixture
            Wait, Is that a V6 or V8?
            1990 Chevrolet C-K 1500 series 4.3L .. 5spd
            1994 JDM Euno Roadster 1.8L 5spd Bolt Ons.. etc
            2000 Camaro 3.8L Auto Bolt Ons..etc

            Comment


            • #7
              Re: nitrous help

              ohhh idk i dont have that i dont think.

              Comment


              • #8
                Re: nitrous help

                I would pick one up for around $200 , it will tell you if you run too lean or rich.
                08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
                96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

                Comment


                • #9
                  Re: nitrous help

                  well im getting tune for it the guy knows what hes doing.

                  Comment


                  • #10
                    Re: nitrous help

                    Not if he doesn't use a wide band.
                    sigpic

                    Comment


                    • #11
                      Re: nitrous help

                      shouldnt the kit have came with one?

                      Comment


                      • #12
                        Re: nitrous help

                        Originally posted by redv6 View Post
                        shouldnt the kit have came with one?
                        No its seperate, but the only way to get a good tune is to use a wideband to tune it.
                        08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
                        96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

                        Comment


                        • #13
                          Re: nitrous help

                          scaaaaaaary

                          Comment

                          Latest Topics

                          Collapse

                          • ssms5411
                            Still trying to find oil leak
                            by ssms5411
                            Still trying to find oil leak on my Camaro, it’s a tough one. I think it is the oil pressure sender myself. Leaking when raving and going into boost....
                            2 days ago
                          • ssms5411
                            Getting some work done on my truck
                            by ssms5411
                            So my truck is finally getting some work done, after 17 years, Oil pressure sensor went out and it’s located under the lower intake manifold. Have to...
                            4 weeks ago

                          FORUM SPONSORS

                          Collapse
                          Working...
                          X