Nitrous Setup on 3.4L

[F-Body Balla]

I'm currently looking into juicing my 105,000 mile 3.4 Liter motor and was wondering what kind of equipment I would need.

Remember that I have the Cam and the mods below... Is any of that going to conflict with a NOS setup?? Mostly the Cam is what I'm worried about.

I'm probably going to go with the 5175 Kit from NOS... But I want all the extras as well.

Could anybody give me the part numbers prices and Manufacturers of such products as...

AFPR - Adjustable Fuel Pressure Regulator

Hi-Flow Fuel Pump

Anything else that will maximize the safety of my motor.

[12secondv6]

Well for all the suggested parts we have posted it before so try a search and go from there.
On a 3.4 I would stick with a 50 - 75 shot.
As for the cam being nitrous friendly, do you have the specs on it?
If yes then my best suggestion wuld be to call the nos tech line and ask them
They deal with this stuff all day long and they would be the best to answer it.
How long ago was the cam installed?
Did you do anything with the heads?
How does it run now?
As for fuel pump, most liley it is not needed but the walbro in tank 255 lph is the best choice for the safest set up.
The 50 or even 75 hp level wont put a big strain on the stock fuel pump unless it is the stock one with 100,000+ miles on it.
We also have previous posts on all the safety features.
Please don't think I'm blowing you off with the 'do a search'
We get these questions all the time
Any other questions feel free to ask