James can you help us out?

[aarong20]

Can you show me and everyone else a picture of where you tapped the vacuum line on your 3.8? if you dont have a closeup of the tap maybe an arrow pointing toward which line you tapped? and also I am installing the nozzel in my lid should I put it before or after that sensor?

[12secondv6]

OK, well I installed mine into a wrong vaccum line so do you want to know which one I used or which one you are supposed to use?
I used the vaccum line that comes out of the drivers side fender with the fuel lines. I used a t fitting.
What you are supposed to use:
Take a look at the sticker under the hood on the radiator cover that is plastic.
It will show you a diagram of the vaccum lines.
There is one line that goes from the stock fuel pressure regulator to something else (basically drivers side to passenger side.
Just put a t fitting in there.

[RaVeN1469]

James: Are you talking about the tiny vacuum line all the way at the back of the engine?

Also I didn't even think about this, my vacuum thing off the regulator has a T and going down is where the jet is and there is a line off of that. Where does that line go to? The other one is the one that goes to the vacuum line correct?

[ July 21, 2002: Message edited by: RaVeN1469 ]</p>

[Silver3800V6FBodyKY]

Hey Aaron - Did you buy another kit? If so why did you sell your 5175 kit to me just a couple weeks ago?