what do you think

[klondike]

what do you guys think of mounting the bottle between the two back seats,did anybody do this instal

[gerard]

thats what i was gonna do, but i woulda had to fabricate a better bracket so the front of the bottle sat at the right angle, instead i just mounted it on the rear deck

[AZ3.8Camaro]

I wouldn't put it there because you would have to drill for a place to mount the "mounts" and for the blow down tube. It would be convenient though.

[OneQuickV6]

I started off mounting mine there, had it that way for about a month. It is very nice and convenient to open, and the "other" guy on the street doesn't know what hit him. Downside being that you really need more of an angle to get the max effect from the bottle, they say about a 45* angle or so. So instead, I recently pulled my rear passenger seat, and have it sitting there at a nice plump angle, still verye easy to reach, just one less seat in the car.

[Badv6]

This ahs to be possible. Why is it hard to mount it there? besides the "mounting" holes in the interior. Does anyone have apic of this?

--------------
New ride: 98 firebird-y87-appearance package-t=tops-MINT-Tri-flo installed sounds unbelievable [img]graemlins/burnout.gif[/img]

Old ride: 94 camaro- t-tops-tri-flo-K&N-underbody neons-Unbelievable condition- SOLD

[12secondv6]

The correct mounting angle is 15 degree's.
Technically if you use a piece of wood flat, then add the tall and short brackets that come with the kit you will obtain a 15 degree angle.
Sure you can mount it in the center, I don't know anyone who has.
You will have to be a bit creative with a mounting board.
Click the link in my sig, see my set up and see if that interests you.

[Steve Presley]

Not my setup, but I found some pics.

insidemount1
insidemount2

If this is your car, lemme know so I can give you credit ;)