Spare Tire Bottle Mount Question

[Red96CamaroRS]

Has anyone figured out a way to mount the bottle so everything can be removed semi-easily so i can throw the spare back in for my summer driving?

[12secondv6]

Well, if you have the bottle mounted to some kind of plank of wood or something then that board of wood (or whatever you use) proably is held in by 4 bolts, remove 4 bolts and viola [img]smile.gif[/img]
Or just get AAA plus for $60 per year and never worry about it again
They tow up to 100 miles for free [img]smile.gif[/img]

[AZ3.8Camaro]

OK I am looking at my bottle mount setup right now, cause its not in my car. I made a wooden plank that is just as thin as the smaller bottle mount on one end, and tapers up to the size of the large mount on the other. I put one large bolt right in the middle of it, and two smaller peices of wood under in, to sit the whole setup a little higher in the spare compartment. I drilled a whole just big enough for the bolt in the bottom of the spare compartment put a washer on it and put it through. Underneath, I put another washer and then 2 nuts to make sure it didn't come off. All you have to do is take off the 2 nuts and it comes right out.

[Red96CamaroRS]

pics?

[AZ3.8Camaro]

Alright, later today..

[12secondv6]

AZ, instead of 2 nuts (hee hee) what about lock washers?
Just a suggestion