Bottle psi not holding

[jersey]

well i started running the juice again. today i got the bottle nice and hot. bottle psi was at 950psi(kinda of low) anyway after spraying for like 6seconds my bottle psi was at 700. what's the deal. i can feel it too. the car will get slower. should the bottle psi hold or drop off very little..

[OneQuickV6]

A search can give you ALOT of informatuion on this one. here's one thread that is just a few down from here. http://www.camarov6.com/cgi-bin/ulti...c&f=3&t=001030

[jersey]

ohh i forgot to add my bottle heater was on for like 45 mins and that thing gets hot as hell

[Skinny]

If your bottle heater was on that long and the bottle was only at 950, then you didn't have enough nitrous to hold the pressure. Once the nitrous volume gets low, you can leave the heater on all day and it won't do a thing. All you need is a refil [img]smile.gif[/img]

[12secondv6]

Did you weigh the bottle to see how much was in there?
Leak somewhere??

[jersey]

i just remembered, i was doing some testing and i was shooting my n20 and fuel into a bucket to see if the solenoids were up to par.. sorry ;)

[12secondv6]

[img]graemlins/rofl.gif[/img]
Hee hee, I only know this from experience [img]smile.gif[/img]