Quarter mile time with 100 shot

[97 30th RS]

I got a buch of mods on my car and I am gonna get a Compucar nitrous kit and I am gonna go what's neccesary for a 100 shot. What sort of times are you guys runnin with a 100 shot? 12's?, high 11's?
[img]graemlins/burnout.gif[/img]

[IronMan]

What gear are you running?

You better get something smaller than 18's if you want to catch traction.

[97 30th RS]

I got a 7.5 ten bolt with 3.42 Lsd and I got a summit rear end cover on too. [img]graemlins/burnout.gif[/img]

[IronMan]

Well, I ran a 14.5 with a 3.08 opne rear and an 85 dry shot.

I also have intake and an edelbrock catback

[IronMan]

I got 3.42's late last year, so I never got to run it with 'em.

I can definitely tell a huge diff. between 3.08 and 3.42

I'd say that you would be close to high 13's if you can catch traction. Do you have your stock wheels?

[IronMan]

One more thing, be careful with the 24lb injectors. Thoe things are the reason 12secv6 blew his motor.

[tim haynes]

14.5 seems kinda slow for a 100 shot .
i mean what the car probably runs a low 15 ceconds now. you would think you would get at least a second on a 100 shot.

[slacker69]

I run 13.1@99.5 with a 1.63 60 foot reason i only have a 13 is my tranny is going out.

[12secondv6]

<blockquote>quote:</font><hr>Originally posted by IronMan:
One more thing, be careful with the 24lb injectors. Thoe things are the reason 12secv6 blew his motor.<hr></blockquote>

Yup

Who did the computer work???

18's aren't the best for traction

I spin to a 12.4 on a 100 shot

[97 30th RS]

I read about 12 sec V-6 camaros with just intake exhaust, 100 wet shot, 30 pound injectors and a 200 gph fuel pump. I got the stock wheels still. Nitto makes a drag radial, a 285 40-18 so I might just get a couple of those. I went to a speed shop called John Halley's Motorsports and they reflashed the computer. It was like a hundred bux. [img]graemlins/burnout.gif[/img]

[97 30th RS]

And what about that universal V-6 Nos manifold? I think that would be a litte better than just gettin a plate system [img]smile.gif[/img]

[12secondv6]

[img]graemlins/bs.gif[/img] VERY rare I raise that here.

Where did you see these v6's?
Do you think you would EVER hook on an 18 inch drag radial??

And that place for computer work..... so this guy knows something that Hypertech, Superchips and everyone else can not figure out???

[Skinny]

<blockquote>quote:</font><hr>Originally posted by 97 30th RS:
I read about 12 sec V-6 camaros with just intake exhaust, 100 wet shot, 30 pound injectors and a 200 gph fuel pump. I got the stock wheels still. Nitto makes a drag radial, a 285 40-18 so I might just get a couple of those. <hr></blockquote>

Where did you read about this???? You're not going to be able to fit a 285/40/18 on an 8" wide wheel. Use the stock rims for drag radials.

[97 30th RS]

The reason there is not a programmer made is because they think there is no market or profit to be made. I don't think it is bs about my computer. Obviously Jet, Hypertech, could make one if they wanted to. Check out fbodyv6.com and some of those guys are runnin 12's with basic bolt ons. None of them have 18's on there of course but I figured I would try them. Thanks for the advice if it is bad to use that tire. [img]graemlins/thumbsup.gif[/img]

[12secondv6]

<blockquote>quote:</font><hr>Originally posted by 97 30th RS:
The reason there is not a programmer made is because they think there is no market or profit to be made. I don't think it is bs about my computer. Obviously Jet, Hypertech, could make one if they wanted to. Check out fbodyv6.com and some of those guys are runnin 12's with basic bolt ons. None of them have 18's on there of course but I figured I would try them. Thanks for the advice if it is bad to use that tire. [img]graemlins/thumbsup.gif[/img] <hr></blockquote>


Please, tell me WHO is running 12's on that site.
I know them very well