hitting wot-THEN-arming?? - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

hitting wot-THEN-arming??

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • hitting wot-THEN-arming??

    ok guys heres my problem...
    running n/a with my 3000 stall verter i get out of the hole just as quick, if not quicker than when i spray. so im wondering if its "safe" for me to start a race with trh zex disarmed, then arm it after i shift into second, that way i dont get the added powen in first, where i dont need it. so it would be like having a n2o button, but is this safe for the system or will it cause damage? or should i just but a nos trigger button?
    later,<br />alan<br />1999 bright red v6<br />3800 series III<br />208\\210 comp cam<br />3000 stall edge tc

  • #2
    I don't see any problem with that. That's how I test upgrades to my system on the highway, not having to come to a complete stop. Just mash the pedal from a roll and then flip the switch to feel the difference.
    \'98 A4 Camaro v6-&gt;v8 conversion, and STS kit next<br />v6: 13.6 Powerdyne, 13.2 150 shot, 13.8 120 shot, 14.3 85 shot, 15.7 stock<br />v8(na): 12.18@113, 392rwhp<br />Moderator on <a href=\"http://www.mtfba.org\" target=\"_blank\">www.mtfba.org</a> and <a href=\"http://www.frrax.com\" target=\"_blank\">www.frrax.com</a> (Road Race & Autocross)<br /><a href=\"http://community.webshots.com/user/johnduncan10\" target=\"_blank\">Car pics</a>, <a href=\"http://www.trscca.com\" target=\"_blank\">TN Region SCCA</a>

    Comment


    • #3
      Yeah you will be fine.. inever spray 1st just when I hit second arm and floor it..
      Jeff ..
      1998 Firebird.. Built 3.8 with a 125 shot.. 370rwhp,415rwtq.. stock tune!! sold

      2002 WS6 T/A.. Bolt ins..448rwhp
      2009 G8 GT.. Vararam intake, GXP axleback
      1998 Corvette.. Vararam intake, Ti axleback
      http://www.fquick.com/slow-v6

      Comment


      • #4
        ok guys,
        thanks, i just now thought of that, it was never a problem until i got that 3000 stall, only thing is i just broke my wrist, so its impossible for me to flick the switch while im holding the wheel, ill try it in 6 weeks though [img]graemlins/crybaby.gif[/img]
        later,<br />alan<br />1999 bright red v6<br />3800 series III<br />208\\210 comp cam<br />3000 stall edge tc

        Comment


        • #5
          what if i just floor it from the start (drag race) then as soon as i get traction arm it and away I go??

          Comment


          • #6
            It works basically the same as a window switch, except you're turning it on. For those who have the window switch, you're n/a off the line anyway, unless you have the switch set at 2000- rpms.
            <b>99 Camaro Z28 A4</b><br />R.I.P. 00 Firebird 3.8<br />14.89 @ 90, 2.03 60\'

            Comment


            • #7
              <blockquote>quote:</font><hr>Originally posted by shortdog273:
              It works basically the same as a window switch, except you're turning it on. For those who have the window switch, you're n/a off the line anyway, unless you have the switch set at 2000- rpms.<hr></blockquote>

              Unless you launch at 3000+ :D
              -<i>Travis</i><br /><b>99 Trans Am, Pewter, A4</b> Forged, stalled, and cammed<br /><b>85 Buick Regal WH1 T-Type</b> It\'d be cool if it ran...<br /><b>94 Camaro 3.4, Teal, M5</b> The daily beater

              Comment


              • #8
                <blockquote>quote:</font><hr>Originally posted by Skinny:


                Unless you launch at 3000+ :D
                <hr></blockquote>
                I don't have my window switch installed yet, so I flip on the switch at around 3K also. ;)
                <b>99 Camaro Z28 A4</b><br />R.I.P. 00 Firebird 3.8<br />14.89 @ 90, 2.03 60\'

                Comment


                • #9
                  Yall need to spray out of the hole nothing beats it i pulled consitant 1.63 60 foots pulling the driver side tire off the ground amazing feeling. I dont see why you dont want to do that. I did this with my 3000 stall
                  <b><a href=\"http://www.sick-sixx.com\" target=\"_blank\">SICK-SIXX MEMBER</a></b><br />NA 14.345 with a 1.863 60 foot<br />Nitrous 13.03@99.5 with a 1.63 60 foot<br /><br />2000 Camaro 3.8L A4: USE TO HAVE Comp Cam 210/220 .535/.547 113lsa 111 I/C, Port and Polished Heads, NX Wet Kit 100 Shot, CPRA made by CP, RK Sport Headers

                  Comment


                  • #10
                    Don't you risk the chance of nitrous backfire when spraying too soon?
                    <b>99 Camaro Z28 A4</b><br />R.I.P. 00 Firebird 3.8<br />14.89 @ 90, 2.03 60\'

                    Comment


                    • #11
                      Flipping the master is like pushing your activation button.

                      That is fine to do.

                      Misterjuice's old buick skylark was juiced and only had master and WOT
                      To gain traction at the track I flipped the master on and off
                      Race car - gone but not forgotten - 1997 firebird V6
                      nitrous et & mph: 12.168 & 110.95 mph, n/a 13.746 & 96.38 mph
                      2013 Dodge Challenger SRT8: 12.125, 116.45
                      2010 Ford Taurus SHO: no times yet

                      Comment

                      Latest Topics

                      Collapse

                      There are no results that meet this criteria.

                      FORUM SPONSORS

                      Collapse
                      Working...
                      X