Nitrous cam

[slacker69]

Thanks James

[OneQuickV6]

My cam specs are 218/218 .528/.528 113lsa 110ic. On my NX 100 shot (wet of course), with no fuel or ignition upgrades at all yet, I gained right at 113rwhp! I beleive that until you go to a larger shot (at least 125 if not more), even a traditional duration like mine will still perform very well with nitrous.

Part of the reason mine performs so well could also be that NX RULES ALL!

[AZ3.8Camaro]

A "Nitrous cam" would be a cam that favored the exhaust with either more exhaust duration or more exhaust valve lift or both.

This really isn't an issue until you run a BIG shot. With stock internals, its not really an issue. Just get a really nice flowing exhaust setup (headers, cat, whatever else.) If you still want to have a more nitrous friendly cam, find a nice NA cam and just add a few degrees exhaust duration, then check out the valve timing that is presented to find a good LS/IC.

[AZ3.8Camaro]

<blockquote>quote:</font><hr>Originally posted by Ender2664:
Umm....so what is the best cam to use for nitrous? Like is there on that provides less overlap making it safer to shoot, or should i just use comp cams?<hr></blockquote>

Something is a little wierd with your perception of a Cam. Comp cams doesn't make a set "CAM" for our cars. They have cores, and then you pick the specs, out of hundreds of them and they work it into the core. A nitrous cam, can be a comp cam, depending on specs, thats all that matters, SPECS, not BRANDS.... Does that help any?

[1998silverbird]

Like James said Slacker knows his $hit..

[ October 03, 2003: Message edited by: 1998silverbird ]</p>

[12secdream]

i had a 206/216 and on the bottle my car was sick.. and i even hit my goals of 12's :D