tps output signal

[Kris Burns]

I'm installing my NX kit saturday and I can't find which wire on the throttle body is the the TPS signal for my NX TPS activation switch it's an 02 so it has fly by wire.

Thanks

[AZ3.8Camaro]

Call they're tech line, thats the easiest way.

[OneQuickV6]

Hmm. Here is where I thought to look first. I didn't see it listed, so agreed....I'd try NX's tech line, or your GM service department.

[slow]

from looking on that link above, i saw this

PIN 66 DK BLU 417 Trottle Position Sensor Signal

is this it? Seems to sounds like a tps output.

Ryan. <-- i would verify with a multimeter before attaching the nx tps switch to be safe.

[ October 24, 2003: Message edited by: slow ]</p>

[AZ3.8Camaro]

Yeah,
turn the key to ON but not START, check it to see how many volts it has, then press the gas to the floor and check it again.
You need around 4.5 volts (I think) to trip the WOT sensor.

[Kris Burns]

Just so everybody knows it's the green wire

[John_D.]

Thanks for the info!