Anyone with nitrous gonna step up this season

[Drone51]

Title says it, any one spraying gonna take shirls title? Come on guys nitrous is just as good as turbos and superchargers if done right.


12 sec when you gonna get you a LSD and some et streets and run 11's? You got yourself a race car, RACE IT [img]smile.gif[/img]

just trying to stir the pot and get people racing and putting out faster times

[12secondv6]

BITE ME! [img]tongue.gif[/img]

I have et streets
I HAVE tried the 125 shot and blown up
I have replaced the LSD multiple times

I will have the good one shortly.

I do not think I will try the 125 shot until it is a direct port system.

[Shirl]

<blockquote>quote:</font><hr> any one spraying gonna take shirls title? <hr></blockquote>

Bring it Drone Boy [img]graemlins/stickpoke.gif[/img] [img]tongue.gif[/img]

[Drone51]

[img]graemlins/rofl.gif[/img]

quiet stock converter girl

just because you cant hook dont think your special its not a good thing hehehe

[img]graemlins/bowdown.gif[/img] [img]graemlins/bowdown.gif[/img]

12sec you got a race car that weighs like 2 lbs

ive seen a little rc car go 200mph you have ohh umm im sure 300 hp more and you cant break 12's


and we all know turbos are the slowest

your still crawlin shane

now all of yall go out and run a new best [img]tongue.gif[/img]


ohh and my stuff should be in the mail for me soon enough

ohh yea and we all know stefan is the slowest one on the board. I think the virus is sick [img]smile.gif[/img]

taking bets 3 to 1

12sec beats stefan

manuals = slow [img]graemlins/rofl.gif[/img] [img]graemlins/rofl.gif[/img] [img]graemlins/rofl.gif[/img]

[ January 19, 2004: Message edited by: Drone51 ]

[ January 19, 2004: Message edited by: Drone51 ]</p>

[staticpike]

Just wait... the tracks haven't opened up yet up here, but I'm patient.

You will all soon feel the power of the DUAL STAGE (cowl in fear here) [img]graemlins/bowdown.gif[/img] .

Actually, I'm really curious to see what I'll pull. I've only ran my car once and it was on bad conditions. I will have done a lot since then (intake, exhaust, gears, shocks, dual stage N20) so I'm not sure how she will react. I'm not completely finished with the dual stage kit yet; I could be, but I'm a perfectionist. Initial try's and tests are good though... [img]graemlins/burnout.gif[/img]

Don't think I'm going to be getting the title any time soon though... [img]graemlins/crybaby.gif[/img]

[ January 19, 2004: Message edited by: staticpike ]</p>

[redbird00]

i want some nitrous...

merlin

[Seppo Kaitainen]

If a nitrous kit magically shows up on my door mat, then I will own all.

[CockyV6]

Dont think Shirl or James are in any danger from me but.............

New gears ( 3.73 ) with limited slip and a TA cover with fasteners

Gonna retard the timing by 4 degrees if at all possible

And work on getting that super six pack.

With all that and starting to spray a 100 shot of TNT dry, I should turn a couple of good times. [img]graemlins/evilgrin.gif[/img]

[Bird_Of_Prey]

<blockquote>quote:</font><hr>Originally posted by Seppo Kaitainen:
If a nitrous kit magically shows up on my door mat, then I will own all.<hr></blockquote>


Send me $500 and an NX Wet kit will magically show up.

[hawgs]

<blockquote>quote:</font><hr>Originally posted by CockyV6:
Dont think Shirl or James are in any danger from me but.............

New gears ( 3.73 ) with limited slip and a TA cover with fasteners

Gonna retard the timing by 4 degrees if at all possible

And work on getting that super six pack.

With all that and starting to spray a 100 shot of TNT dry, I should turn a couple of good times. [img]graemlins/evilgrin.gif[/img] <hr></blockquote>

HRP time? ;)

[Tiago]

seppo with a little jooce woudl cause some damage :D

[1998silverbird]

Well lets see.. Soon my motor will be together.. Thats ssms heads and intake with a 150 direct port adjustable to 300hp, Manley H-beams, Ross Pistons, Forged Crank, Nice size nitrous cam..

I have a 12 bolt waiting for install, Have a Tranny getting ready to be sent off to G force.. Skinny fats with Drag radials untill my tranny and rear are finished and then its slicks..Lots of tuning with autotap too.. Right now its just a 90 wet shot on a bone stock motor..

[CockyV6]

<blockquote>quote:</font><hr>Originally posted by 1998silverbird:
Well lets see.. Soon my motor will be together.. Thats ssms heads and intake with a 150 direct port adjustable to 300hp, Manley H-beams, Ross Pistons, Forged Crank, Nice size nitrous cam..

I have a 12 bolt waiting for install, Have a Tranny getting ready to be sent off to G force.. Skinny fats with Drag radials untill my tranny and rear are finished and then its slicks..Lots of tuning with autotap too.. Right now its just a 90 wet shot on a bone stock motor..<hr></blockquote>

[img]graemlins/omg.gif[/img] Dang Jeff!!!!!!! And here I thought that I was doin pretty good. That sounds like a killer combo. [img]graemlins/thumbsup.gif[/img] [img]graemlins/burnout.gif[/img] [img]graemlins/bowdown.gif[/img]

[ January 21, 2004: Message edited by: CockyV6 ]</p>

[Seppo Kaitainen]

<blockquote>quote:</font><hr>Originally posted by Bird_Of_Prey:
Send me $500 and an NX Wet kit will magically show up.<hr></blockquote>

[Checks pockets] How much lint equals 500 dollars?

[1998silverbird]

<blockquote>quote:</font><hr>Originally posted by CockyV6:


[img]graemlins/omg.gif[/img] Dang Jeff!!!!!!! And here I thought that I was doin pretty good. That sounds like a killer combo. [img]graemlins/thumbsup.gif[/img] [img]graemlins/burnout.gif[/img] [img]graemlins/bowdown.gif[/img]

[ January 21, 2004: Message edited by: CockyV6 ]<hr></blockquote>

This wont be for a couple of months.. I am out to sea right now on the USS Kennedy and when I get back next month the block is going to the machine shop with the rotating assembly.. My tranny I am going to ship out in the middle of march and my 12 bolt I have to pick up in NC.. Got it out of the trading post for 250.00..