"Tee" Fitting for FPSS

[ChronoGN]

My FPSS didnt come with the 1/8 NPT Tee fitting.
Where can I get one? I looked on ebay, ramchargers.com, etc but I cant find it.

[AZ3.8Camaro]

Here ya go...

[ChronoGN]

Is that the Tee fitting or does that just an adapter type thing to put the FPSS on the test port?
I need the Tee fitting because I have a wet kit and I would need to have the fuel from the test port going into the nozzle.

[1998silverbird]

And does anybody with a wet kit have a fuel pressure gauge?? what t fitting did you use for that?? Probably the same as the fpss..

[slow]

your looking for a "union" fitting, male -4 fitting, female -4 fitting, (so it connects inline) with a 1/8" npt adapter.

http://www.speedshop.org/store/scrip...p?idproduct=26

not the cheapest place to get one, but they carry it. Try a local speedshop, should be around $10 or so

Ryan

[AZ3.8Camaro]

I see, duh... You want to hook up a fuel line and a FPSS or gauge or something right?
I dunno what the number is for that part.
Sorry.

[12secondv6]

My fuel guage is electric.
It has a sender unit off my afpr which is mounted inline with my stock fuel lines.

As for the t fitting, I ordered all parts from NOS direct

[1998silverbird]

Originally posted by 12secondv6:
My fuel guage is electric.
It has a sender unit off my afpr which is mounted inline with my stock fuel lines.

As for the t fitting, I ordered all parts from NOS direct

Do you by chance have the part number of the T fitting for the fuel pressuer gauge?? You ran off the fuel rail or before the fuel solinoid??

[12secondv6]

I doin't know the part #, it has been ages.

I called NOS direct and explained what I needed.

My fuel guage was run off my AFPR, not the rail, but you could just run it off the rail w/ an elec fuel psi sending unit

Autometer makes one