Tweet
On a 3.4 what size is the test port on the fuel rail? I need to know the size for the threads so I can get the fuel to my Solenoid. I found a fitting that sorta works (1/4 X 1/8 brake fitting). The 1/4 side is female but when I match it with a 1/4 coupling, the threads and size are different ??? The part is from Oreily it's an Edelman 124420. Thanks.
-
MODS:<br />3.4,Crower cam, K-motion valvesprings, Heddman Longtubes, BBK AFPR, Accel Coil, 36mm/23mm Sways, Boxed LCAs/Panhard bar, Mutant Nitrous wet kit, Mr. Gasket Cutout, 10.02 1/8 mile at 67.2 mph UNTUNNED no spray -
should be -4AN.... thats what most are I believe... -
You were right! I tested the main line from the bottle (which I know to be -4 AN) and it fit perfectly. What does that convert to in normal compression fitting size (I think it's 1/4"). Not 1/4" NPT, just 1/4...? I bought a fitting and it fit (the one stated above) but the collar was a bit short, so I'll have to buy a different one (and I plan on running brakeline for the fuel line, so it needs to be a double female). Thanks!MODS:<br />3.4,Crower cam, K-motion valvesprings, Heddman Longtubes, BBK AFPR, Accel Coil, 36mm/23mm Sways, Boxed LCAs/Panhard bar, Mutant Nitrous wet kit, Mr. Gasket Cutout, 10.02 1/8 mile at 67.2 mph UNTUNNED no sprayComment
-
you have to use the -AN fittings, they are a tapered thread. I would imagine a standard fitting would work, but it might leak....Comment
-
The threads aren't where the sealing occurs, NA fittings work on comprssion [img]smile.gif[/img] .MODS:<br />3.4,Crower cam, K-motion valvesprings, Heddman Longtubes, BBK AFPR, Accel Coil, 36mm/23mm Sways, Boxed LCAs/Panhard bar, Mutant Nitrous wet kit, Mr. Gasket Cutout, 10.02 1/8 mile at 67.2 mph UNTUNNED no sprayComment
-
Hey guys. For starters I’ve always been a big car guy, I love all types of cars and can appreciate all types of engineering. I’ve always been a Chevy...3 days ago -
Getting a massage saying invalid interface, haven’t used it since last year probably November. First time in 23 years I had a problem. Going to get...5 days ago -
-
need help finding a balancer and a replacement balancer bolt. im at a lost after confusing myself researching.1 week ago -
Hello every one, ozzy here ive been looking at this page for weeks now finally joined. So my question is why is it that every turbo build forum just ends...1 week ago
Comment