Nitrous safety extra's...?

[Jtownrook99firebird]

I'm gonna buy that NOS 5175 kit... what all can I buy that's not included in the kit 2 make it as safe as possible? I made a little list but I don't wanna over-look anything in case their's just someth'n I don't know about.

[Loochy88]

rpm window switch, and a fuel pressure safety switch probably comes with it, correct?

[1DangerousV6]

the fuel pressure safety switch will come with the kit..as well as a wide open throttle switch..although a window switch is primarily used to control backfires and is therefor more useful on a wet kit..its never a bad idea..i find a dry kit (what 5175 is) will work best with the bottle pressure between 1000 and 1100 psi..so you'll want a bottle heater..i suggest one that is pressure controlled (by a pressure transducer) and not temperature controlled..also..if you try to inject not knowing you are out of nitrous..you can run very rich and foul your plugs..so you'll want a pressure gauge..i would also recommend NGK TR6 plugs gapped a .035..so..the list..

1: window switch
2: pressure gauge
3: bottle heater
4: NGK TR6 plugs gapped at .035

..use as instructed and have fun [img]smile.gif[/img]

[oil pan 4]

A few idea might beRPM shut off (windo sw.) WOT switch, fuel pressure sw and stuff along with my exhaust O2 safty swithch when I build it.

[12secondv6]

http://mods.firebirdv6.com/nitrous.html