The Kit has Arrived! :-D

[Matt G]

Picture 1
Picture 2


Just got it in the mail. I read through the directions and decided its best to let the professionals take care of the installation. I am definatly out of my league on this one.

I got a coupon from Summit for $20 off my next purchase :D I'm going to buy a purge kit.

What size purge kit should I buy? -4AN or -6AN?

[ January 26, 2006, 02:01 PM: Message edited by: Matt G ]

[xcdarrel17]

The install really isn't that hard if you just take it one step at a time and follow the instructions closely.

[Matt G]

you think i could do it? I could try.. they want 350 bucks to install it and thats a lot of money :(

I don't want to try and mess up.. then have a story to tell them lol

[xcdarrel17]

I dont want to take the liability for things if you do mess something up, but the install is something that you can do by yourself if you have a little bit of mechanical ingenuity.

[xcdarrel17]

You got the 05175 kit, right? The only thing you have to hook up to a fuel line is the fpss to the schrader valve, which entails using a removal tool to take the valve out and screwing on a connector. As for the brackets, that's the part you have to figure out on your own. I put it in the spare tire area, using a 2x4 and some screws.

[Matt G]

yeah I got the 05175 kit. I went through a couple steps and I am very worried about messing something up. I don't want to take the chance of ruining this kit. I wish one of my buddies had experience installing nitrous :-\

[pumm3l]

Originally posted by Matt G:
Picture 1
Picture 2


Just got it in the mail. I read through the directions and decided its best to let the professionals take care of the installation. I am definatly out of my league on this one.

I got a coupon from Summit for $20 off my next purchase :D I'm going to buy a purge kit.

What size purge kit should I buy? -4AN or -6AN?

You want the 4an for the purge.

if you install it yourself just take your time and if you have any questions just ask, it's really not that complicated.

[Matt G]

I am going to pull my car into the garage and attempt to install it.. I will keep everybody posted.

[Red]

Just don't over tighten the jic threads. Justhand tight, then 1/4 turn.

Nos should do a little more to promote their brand, could hardly tell it was theirs in the pics..

[StrtRacer98]

haha yeah i had no idea it was made by Nos!..

I have installed nitrous before.. just think everything threw and dont get ahead of urself and u'll be fine.

Keep posting!

[Matt G]

I've been struggling with getting the bottle mounted.. the brackets suck. I've been told I can mount it on an angle so I will head back out and try once again... I thought getting it mounted was going to be the easy part.. lol

[chets bird]

matt TAKE pics of all this as i will be doing this install soon!!!

[dmw319]

Originally posted by chets bird:
matt TAKE pics of all this as i will be doing this install soon!!!

noooooooooo :(

[Matt G]

i could only get the bottle installed tonight.. i've been busy with school.. I don't have school until monday so I should be able to work on installing it during the night when i don't have work.. so far these are the pics..


Mounted 1
Mounted 2

I ended up cutting 4 squares in the carpet because drilling through the carpet and the stuff under it kept clogging up the drill.

[chets bird]

DUDE the fuel tank is DIRECTLY under that i hope u knew this and either A had something under there (wood) or B. used very small screws, ALSO TINT the hell outta the windows with that, and 3 KEEP taking pictures, maybe keep the camera handy and in the middle of install take a pic that would be good for write ups!!! [img]smile.gif[/img] as dmw fears me getting nos cause he know is will beat him!!! [img]smile.gif[/img]