home made bottle warmer.

[lilchubby]

ok guys one of my friends told me about a set up he used to have with a home made bottle warmer. he said that he used a heating pad that he had laying around. he hooked it up to an inverter in the car and that it worked fine. i have seen were they even make heating pads that plug into a cigarette lighter now. so why wouldnt this work. i mean assuming u keep a check on the bottle to insure it doesnt over heat, it would work right?i mean cost wise this would be a big cut. so what do yall think?

[StrtRacer98]

Also, check home depot, for pipe heaters
Its kinda like a wire you wrap around pipes in the winter to keep them from freezing, if they are outside, and you plug it in to 12 volts, just wrap that around your bottle and put a switch in line, to a power inverter

[1DangerousV6]

as long as you keep an eye on the pressure it should be fine..thats what i do..i took the thermostats out of my bottle heater so i could get it up over 1000 psi and just keep an eye on it

[usd2sing]

Originally posted by 1DangerousV6:
as long as you keep an eye on the pressure it should be fine..thats what i do..i took the thermostats out of my bottle heater so i could get it up over 1000 psi and just keep an eye on it

that is an awesome idea!!! very creative.
i keep having pressure at 850-950 with my heater on. and it takes 30min to get that.
think i'll try it..thanks

[kristen]

i'm one for safty. so i have my bottle heater, and instead of a thermostat i have a extention on the bottle that lets the psi go to 1100-1200.

but yes all of those ideas will work.