purge

[lilchubby]

ok i just ordered the harris speed works kit. i was wanting to know if i had to use their purge kit that they sale. i know they use 4an line fittings so would any other purge kit using that size work? thanks in advance, forrest.

[Matt G]

I would think so...

[97rs4life]

you could use another purge kit. same size lines and all.

[pumm3l]

all I did was find a cheap used NOS solenoid on ebay, bought this fitting:

http://www.holley.com/products.asp?product=16435NOS

and went to the local hardware store and picked up some 1/8" copper tubing, cost me about $50 for everything. I have an NX kit btw, your purge doesn't have to match the brand of your kit you can get anything you want.

[xcdarrel17]

So, where exactly did you splice into to use that fitting?

[pumm3l]

well on my NX nitrous solenoid there's a 1/8" "purge" outlet on the other side. so you need a male to male 1/8" fitting to connect the purge solenoid to the nitrous solenoid then that T fitting goes into the outlet side of the purge solenoid with the T fitting I can run a dual purge they also sell the single compression fitting if you didn't want the dual purge.

If you don't have a purge port on your main nitrous solenoid you can just get one of these:

http://www.dynotunenitrous.com/store...p?idproduct=26

and put it inline with your main nitrous line then just connect the purge to that fitting