Tweet
ok i just ordered the harris speed works kit. i was wanting to know if i had to use their purge kit that they sale. i know they use 4an line fittings so would any other purge kit using that size work? thanks in advance, forrest.
-
-
I would think so...<b><a href=\"http://www.cardomain.com/ride/2288859\" target=\"_blank\">1999 Mustang GT(Car Domain)</a><br /><a href=\"http://www.cardomain.com/ride/2123740\" target=\"_blank\">1998 Pontiac Firebird(Car Domain) *SOLD*</a></b> <br /><br /><a href=\"http://www.camarov6.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=9;t=000902\" target=\"_blank\"><b>PA</b> - Maple Grove Test\'N\'Tune <i>April 15th</i></a> -
-
all I did was find a cheap used NOS solenoid on ebay, bought this fitting:
http://www.holley.com/products.asp?product=16435NOS
and went to the local hardware store and picked up some 1/8" copper tubing, cost me about $50 for everything. I have an NX kit btw, your purge doesn't have to match the brand of your kit you can get anything you want.Comment
-
So, where exactly did you splice into to use that fitting?Old Car = 12.679 @ 106.5 on 150 dry shot.
New Car = 2010 3.6l 304hp CamaroComment
-
well on my NX nitrous solenoid there's a 1/8" "purge" outlet on the other side. so you need a male to male 1/8" fitting to connect the purge solenoid to the nitrous solenoid then that T fitting goes into the outlet side of the purge solenoid with the T fitting I can run a dual purge they also sell the single compression fitting if you didn't want the dual purge.
If you don't have a purge port on your main nitrous solenoid you can just get one of these:
http://www.dynotunenitrous.com/store...p?idproduct=26
and put it inline with your main nitrous line then just connect the purge to that fittingComment
Comment