WOT Pic - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

WOT Pic

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • WOT Pic

    Anyone have a pic of the WOT switch behind the gas pedal? Thanks

  • #2
    Re: WOT Pic

    I dont reccomend putting it behind the gas pedal. I put mine on the throttle body under the hood. I will get you a pic tomorrow.
    sigpic
    1997 Camaro RS A4
    2006 Chevy Colorado
    2003 Kawasaki Ninja ZX6-R

    Comment


    • #3
      Re: WOT Pic

      Why not? Thanks in advance for the pic.

      Comment


      • #4
        Re: WOT Pic

        Originally posted by Shodown
        I dont reccomend putting it behind the gas pedal. I put mine on the throttle body under the hood. I will get you a pic tomorrow.
        you have a 97, he has a 2001 and not the same tb or setup.
        http://www.bowtiev6.com/

        Comment


        • #5
          Re: WOT Pic

          there is where i HAD to put mine since i have the elec. tb. the camaro is at home. so i will take some pics when i get home.
          WAWA-A-HOLIC

          Comment


          • #6
            Re: WOT Pic

            Thats what I thought and thats why I asked for the pic of the switch behind the gas pedal.

            Comment


            • #7
              Re: WOT Pic

              Originally posted by 97rs4life
              you have a 97, he has a 2001 and not the same tb or setup.
              Ooooohhhh, I didnt even realize that. Sorry bro, I wasnt trying to give ya bad advice. :twak: me
              sigpic
              1997 Camaro RS A4
              2006 Chevy Colorado
              2003 Kawasaki Ninja ZX6-R

              Comment


              • #8
                Re: WOT Pic

                here you go, and yes they are on there with zip ties, i just used them for a temp job 2 years ago and haven't had to change them yet!!!!


                WAWA-A-HOLIC

                Comment


                • #9
                  Re: WOT Pic

                  If it becomes an issue they do sell electronic WOT switches!

                  Comment


                  • #10
                    Re: WOT Pic

                    No WOT switch here
                    Race car - gone but not forgotten - 1997 firebird V6
                    nitrous et & mph: 12.168 & 110.95 mph, n/a 13.746 & 96.38 mph
                    2013 Dodge Challenger SRT8: 12.125, 116.45
                    2010 Ford Taurus SHO: no times yet

                    Comment


                    • #11
                      Re: WOT Pic

                      Thanks Kristen for the pics. I tried to shape the bracket on the WOT switch to put it in the same place as yours but I had no luck...so I did the zip tie thing too! It actually worked out pretty good. Now I have another stupid question. I'm having trouble with installing the blow down tube. The little hexagon nut thats on the valve, does that come off or stay on? I think I'm missing a fitting or something.

                      Comment


                      • #12
                        Re: WOT Pic

                        i don't have a blow down tube
                        WAWA-A-HOLIC

                        Comment


                        • #13
                          Re: WOT Pic

                          I got mine to screw near the throttle under the hood. so when i step on the pedel all the way down it activates it. Dang it I wish I had a camera to show ya. Its on a 97 by the way.
                          <a href=\"http://www.cardomain.com/id/lucky19\" target=\"_blank\">http://www.cardomain.com/id/lucky19</a>

                          Comment


                          • #14
                            Re: WOT Pic

                            Originally posted by benavidez19
                            I got mine to screw near the throttle under the hood. so when i step on the pedel all the way down it activates it. Dang it I wish I had a camera to show ya. Its on a 97 by the way.
                            He has a different TB, I tried giving the same advice, but 97RS4life brought up a good point...he has a different throttle body so it wont mount like yours, mine and 97RS4life's.
                            sigpic
                            1997 Camaro RS A4
                            2006 Chevy Colorado
                            2003 Kawasaki Ninja ZX6-R

                            Comment


                            • #15
                              Re: WOT Pic

                              Originally posted by redbird2001
                              Thanks Kristen for the pics. I tried to shape the bracket on the WOT switch to put it in the same place as yours but I had no luck...so I did the zip tie thing too! It actually worked out pretty good. Now I have another stupid question. I'm having trouble with installing the blow down tube. The little hexagon nut thats on the valve, does that come off or stay on? I think I'm missing a fitting or something.
                              Bottle needs to be empty, and yes you remove that hex nut on the bottle, it looks like a nut type thing with some vents right? there's a pressure disc in there that will rupture if there's to much pressure in the bottle and will release the nitrous through that hex nut you're referring to. So you remove that hex nut make sure you put in a new pressure disc and you should be good to go.

                              Comment

                              Latest Topics

                              Collapse

                              • Dongrossmd
                                Throttle Position Sensor trouble shooting
                                by Dongrossmd
                                I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...
                                2 weeks ago
                              • ssms5411
                                New stereo
                                by ssms5411
                                Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...
                                2 weeks ago

                              FORUM SPONSORS

                              Collapse
                              Working...
                              X