Tweet
I finished the nitrous install yesterday but I kept blowing the fuse right above where the wire is going into the fuse box from the arming switch. I had a quick look at the wires and there are a couple of grounds that look sketchy. Could a ground wire blow a fuse? So I disconnected that wire and the wire to the battery and went for a cruise. This morning my garage stinks of fuel. I checked the FPSS and the fitting is tight so I don't know what the problem is. Thanks.
-
-
Re: Blown Fuse
what kit do you have, and is it wet or dry?
A sketchy ground can blow fuses, the grounds all should be cleaned and ground securely. -
Re: Blown Fuse
I have the 5175 kit with a MSD window switch. I fixed all the grounds and still blew the same fuse.Comment
-
Re: Blown Fuse
is it the size fuse they recommended or are you overloading a fuse with a bunch of accessories?Comment
-
I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...2 weeks ago -
Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...2 weeks ago
Comment