Powerfogger install pics

[Shodown]

Just got finished hooking up my Powerfogger wet shot conversion kit. Only problem is that the FPSS isnt working properly :( . I tried activating it by hand just to make sure everything was working and nothing happened so I unhooked the wires from the FPSS and ran it as a regular ground and it worked fine. Dont know what I'm going to do about it yet, new FPSS or move it to the fuel rail but I messed that up too :o I cross threaded the fuel test port...oops. I am getting it replaced next week. But here is what it looks like for now:

http://s36.photobucket.com/albums/e4...gAnch=imgAnch2

http://s36.photobucket.com/albums/e4...gAnch=imgAnch3

http://s36.photobucket.com/albums/e4...gAnch=imgAnch5

http://s36.photobucket.com/albums/e4...gAnch=imgAnch6

I wont be testing it out quite yet either cuz I am going back to the dyno for another tune.

[97rs4life]

Re: Powerfogger install pics

did you use teflon tape on that FPSS? check to see if any got stuck in the FPSS and that is why it isn't working

[Shodown]

Re: Powerfogger install pics

did you use teflon tape on that FPSS? check to see if any got stuck in the FPSS and that is why it isn't working

I checked and it was clean.

What is the cut-off pressure for the FPSS? I was thinking that maybe there isnt enough pressure in that line like there is on the fuel rail. Just a thought.

[97rs4life]

Re: Powerfogger install pics

I am not sure what yours is set at. You can turn the dial on the FPSS to make it more or less pressure to activate

[Shodown]

Re: Powerfogger install pics

I am not sure what yours is set at. You can turn the dial on the FPSS to make it more or less pressure to activate

How? Mine is from NOS and I'm not sure it is adjustable. If it is thats no problem I will just adjust it. I will still buy your fuel rail though (sent ya another PM :) )