placement

[firebirdv6 3.4]

I have a 94 firebird with a 3.4, I was looking to get a wet kit, but heard the nossle has to be mounted after the MAFS. If im not mistaken the MAFS is in the thottle body, so there is no room to mount the nossle. So what do I do? I need yalls help.

[lilchubby]

Re: placement

http://forum.camarov6.com/showthread.php?t=73720

it should be just about the same on ur 3.4 as his 3.8 i belive. if not it should give u a gerneral idea. also u can buy a throttle body spacer and tap it for the nozzle.

[firebirdv6 3.4]

Re: placement

Where would I buy a spacer at?

[Shodown]

Re: placement

I dont know of anyone who makes a TB spacer for the 3.4 or 3.8 fbodies. Silvachris designed/machined his own.

You'll have to drill/tap the TB. Look in the instructions for the nitrous kit and it should have the tap size you need.

What kit are you looking at? I can see if I can dig some instructions for ya.

[firebirdv6 3.4]

Re: placement

What kit are you looking at? I can see if I can dig some instructions for ya.

It's a zex wet kit. http://www.compperformancegroupstore...uct_Code=82021

[Shodown]

Re: placement

Okay, here are the instructions for that kit:

http://www.zex.com/Base/Instructions/ZEX132.pdf

So you shouldnt need to buy a tap, that kit already comes with the 1/8" NPT needed for installation. If you are buying the kit used, the seller may keep the tap, if they do you will need to go to a local hardware store and pick up one up.

That looks like a pretty good kit and very easy to install.