purge line finally ran

[lilchubby]

finally got around to running the metal purge line. i want to do this out both headlights, but i can find a y fitting that wont blow off with the pressure of the nitrous. any ideas? anyways here it is...



http://media.putfile.com/purge-60

[Shodown]

Re: purge line finally ran

You have 2 options:

1. http://www.dynotunenitrous.com/store...p?idproduct=68 You should be able to just make a fitting like the one in that kit from parts at a hardware store too. It shouldnt blow out.

If that doesnt work....

2. Get a second nitrous 'noid and a tee fitting so you have 2 purge 'noids. Thats what I did, but only because I had an extra 'noid in my tool box.

[lilchubby]

Re: purge line finally ran

that looks good...i would need some more line. i actually like the metal line a lot better, i would have to get some of that from harris speed works. thanks for the link though showdown

[Shodown]

Re: purge line finally ran

I got my copper farrel lines from O'Reilly's for $0.50 per foot. I dont recommend buying it from HSW cuz they will charge you too much. Just tryin to save you some $$$ :)

[97rs4life]

Re: purge line finally ran

I went to the hardware store and bought some clear hard plastic tubing and a tee fitting and have my purge split to both fog lights. So now when I purge the fog lights illuminate it. Works just fine and cheaper than ordering a bunch of stuff online.

[Shodown]

Re: purge line finally ran

I went to the hardware store and bought some clear hard plastic tubing and a tee fitting and have my purge split to both fog lights. So now when I purge the fog lights illuminate it. Works just fine and cheaper than ordering a bunch of stuff online.

Exactly :tup:

I just posted that link to the Dyno Tune to show what the homemade tee fitting should look like.

[12secondv6]

Re: purge line finally ran

I went to local auto parts store.... bought a small roll of copper tubing and various fittings (including a T fitting) and viola.