Tweet
question on fitting
ok i need to know sizes here. i am geting some gages to finsh off my nos kit i am geting the colbalt fuel and nos psi gages both electric now the fitings for the sender are all 1/8'' fittings for both so in the AN sizes that the hoses use what is 1/8'' in the AN size. also what is size for the fuel rail test port that you fit the fuel hose on. i need to get two T adapers one for the nos and one for the fuel sender units and lines that go to the solenoids i have a 2000 camaro with the 3.8l any help would be great thanks guys love the site.
-
-
Re: question on fitting
I dont know what you are asking. Use ? marks.sigpic
1997 Camaro RS A4
2006 Chevy Colorado
2003 Kawasaki Ninja ZX6-R -
Re: question on fitting
1/8 is different than any AN fittings, so you will need adaptors unless your fittings are nptComment
-
Re: question on fitting
ok were is a good place to get the fittings at and what does AN and NPT mean anyway?Originally posted by 97rs4lifeComment
-
-
Re: question on fitting
I think this is what you are looking for:
http://www.dynotunenitrous.com/store...?idproduct=217
But you still need a 90 degree elbow to put on the fuel rail test port. You will have to go to a hardware store or fastener store cuz I cant find one online.
You could also tap a fuel line and put in one of these. 97rs4life and I both did that:
http://store.summitracing.com/partde...5&autoview=skusigpic
1997 Camaro RS A4
2006 Chevy Colorado
2003 Kawasaki Ninja ZX6-RComment
-
Re: question on fitting
do you think you can send me a picture of what yours looks like toOriginally posted by Shodown
tbboardhed2@gmail.com
it would be very helpfull. i am new to this if you haven't noticed haComment
Comment