gauge pillar

[1999Spectre]

will this gauge pillar fit in my car, i dont have t-tops but its the only pillar i can find for a pretty good price, and how hard is it to install a nitrous gauge and what all does that consist of?

[97rs4life]

Re: gauge pillar

uh what pillar?

[1999Spectre]

Re: gauge pillar

my bad lol
http://store.summitracing.com/partde...5&autoview=sku

[97rs4life]

Re: gauge pillar

you will need to trim a bit at the top as it is made to wrap around where the ttop goes. Not a big deal really. But other than a little trimming it will work

[1999Spectre]

Re: gauge pillar

so what about the nitrous gauge install?

[Shodown]

Re: gauge pillar

I made it fit my car. It doesnt look perfect, but it looks good. Viper made it fit his car too.

I'll try to get some pics tomorrow and I'll post them for ya.

[Shodown]

Re: gauge pillar

Mine is not perfect, I was in a lil bit of a hurry when I put it in so I scratched it :slap:

Just take your time with a dremel and it will fit fine.






BTW, I put my nitrous gauge in the cubby area in front of the shifter and my switches in the ashtray hehehehe. It looks cool, but I couldnt get a good pic of it at night with my digi cam.

[kristen]

Re: gauge pillar

i trimmed mine also since i was a hard top at the time.

but this is just another reason for you to do the t top conver.

[1999Spectre]

Re: gauge pillar

whats the nitrous gauge install like? i also have a fuel pressure gauge coming in, how hard is that install?

[Shodown]

Re: gauge pillar

whats the nitrous gauge install like?

Lots of fab work and patience.

i also have a fuel pressure gauge coming in, how hard is that install?

Easy, just take it from the fuel test port on the fuel rail.

[ssms5411]

Re: gauge pillar

I tried to do the tripple in mine, but I didn't like the look of how I trimed it, so the dual went back in. It does take some trimming. Now the tripple sits on the shelf.

[1999Spectre]

Re: gauge pillar

i got my nitrous coming from the fuel rail

anywhere else i can hook up the fuel pressure gauge?
what does the nitrous gauge install consist of?

[Shodown]

Re: gauge pillar

I gotta say that is not a really good way to get fuel off the rail. The fitting on the rail is a -4AN, get a female fitting to fit that then just use a gauge adapter for the fuel press gauge.

[ssms5411]

Re: gauge pillar

i got my nitrous coming from the fuel rail

anywhere else i can hook up the fuel pressure gauge?
what does the nitrous gauge install consist of?

I hope that was a joke picture, that is really unsafe if your running it like that. Your car could burst into flames if that pops off or leaks.

[v6mOtOrhEAdftOp]

Re: gauge pillar

I have a dual guage pillar pod if you only need 2 guages that I'd be willing to let go for $35 shipped