Tweet
Okay I removed the original valve that says 3000psi but it has a safety cap should I keep the safety cap and install the blowdown tube even though my blowdown tube also has a safety cap where it screws on. This is very serious to me because I will be installing my bottle on the hatch area below where the back window is at and it will be directly into the sunlight and I stay in houston so this must be installed correctly incase the bottle gets to hot due to the sunlight I would hate to get burned from the cold nitrous I have seen pictures and it looks real bad. Can someone help me out with this situation asap please
-
-
Re: I am installing blow down tube help
never mind these guys showed me a video and I was right here is a link incase someone has the same problem that I had http://www.coldfusionnitrous.com/dvd/video.htm -
Re: I am installing blow down tube help
get relly dark window tint on the back. just a thought.Comment
-
Re: I am installing blow down tube help
I have 20% all aroundComment
-
I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...2 weeks ago -
Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...2 weeks ago
Comment