I am installing blow down tube help

[eric v6]

Okay I removed the original valve that says 3000psi but it has a safety cap should I keep the safety cap and install the blowdown tube even though my blowdown tube also has a safety cap where it screws on. This is very serious to me because I will be installing my bottle on the hatch area below where the back window is at and it will be directly into the sunlight and I stay in houston so this must be installed correctly incase the bottle gets to hot due to the sunlight I would hate to get burned from the cold nitrous I have seen pictures and it looks real bad. Can someone help me out with this situation asap please

[eric v6]

Re: I am installing blow down tube help

never mind these guys showed me a video and I was right here is a link incase someone has the same problem that I had http://www.coldfusionnitrous.com/dvd/video.htm

[niik000]

Re: I am installing blow down tube help

get relly dark window tint on the back. just a thought.

[eric v6]

Re: I am installing blow down tube help

I have 20% all around