ls1 kit on v6?

[HossV6]

can a kit from harrisspeed for an ls1 ect platform be used on a v6 car? i thought nitrous kits were some what universal.

[bottlefedv6]

Re: ls1 kit on v6?

nitrous kits are universal unless they have a plate or something instead of a nozzle. As long as it uses a nozzle it will work on a v6

[ssms5411]

Re: ls1 kit on v6?

I had thought V8 kits use a bigger line for the nitrous and fuel, this would throw off jet sizing a bit, ours 4an and I thought V8's where 6 an, I could be wrong though. I hope someone can give some help on this.

[Bird_Of_Prey]

Re: ls1 kit on v6?

It will work. V6 and V8 base kits use 4an. I'm unsure if that's exactly how Harris Speed works, but if it's a nozzle, you're good to go. 6an kits are usually a price step up.

[Shodown]

Re: ls1 kit on v6?

Should work just fine.

[Trotter]

Re: ls1 kit on v6?

im running the hsw ls1 kit. you just have to change how the solenoids mount

[bigbrian442]

Re: ls1 kit on v6?

The Kits with the 6AN line are for 300 plus horsepower and two stage systems.

[ssms5411]

Re: ls1 kit on v6?

I guess that clears it up for me, nice to know you can use V8 kits.

[HossV6]

Re: ls1 kit on v6?

http://www.harrisspeedworks.com/shop...cat=365&page=1

thats the kit im looking at, i beleive it has 4 an line so im guessing its ok for us to use

[shortdog273]

Re: ls1 kit on v6?

That'll work, but just make sure it's wired up correctly.

[zpwn06]

Re: ls1 kit on v6?

any advantages to using a plate kit? I remember ZEX recommending you mount the nozzle about 6 (?) inches away from the TB. Does plate give you enough room?

[bottlefedv6]

Re: ls1 kit on v6?

any advantages to using a plate kit? I remember ZEX recommending you mount the nozzle about 6 (?) inches away from the TB. Does plate give you enough room?

a plate kit is made to work with an ls1 intake, so no it is not going to work on a v6. A plate sprays the nitrous and fuel in a pattern to mix it, works great on ls1 car and lt1 cars. It would be a wet kit if it is a plate.